File Manager

003 File Manager

Current Path: /usr/src/sys/mips/conf

📁 ..
📄 ALFA_HORNET_UB(1.25 KB)
📄 ALFA_HORNET_UB.hints(2.66 KB)
📄 AP121(1.09 KB)
📄 AP121.hints(2.61 KB)
📄 AP135(1.6 KB)
📄 AP135.hints(5.13 KB)
📄 AP143(1.1 KB)
📄 AP143.hints(2.9 KB)
📄 AP91(1.49 KB)
📄 AP91.hints(2.66 KB)
📄 AP93(1.03 KB)
📄 AP93.hints(3.34 KB)
📄 AP94(760 B)
📄 AP94.hints(717 B)
📄 AP96(1.06 KB)
📄 AP96.hints(2.39 KB)
📄 AR5312_BASE.hints(574 B)
📄 AR5315_BASE.hints(593 B)
📄 AR71XX_BASE(1.58 KB)
📄 AR71XX_BASE.hints(1.2 KB)
📄 AR724X_BASE.hints(1.2 KB)
📄 AR91XX_BASE.hints(1.48 KB)
📄 AR933X_BASE.hints(1.77 KB)
📄 AR934X_BASE.hints(1.95 KB)
📄 BCM(2.44 KB)
📄 BCM.hints(146 B)
📄 BERI_DE4.hints(691 B)
📄 BERI_DE4_BASE(1.13 KB)
📄 BERI_DE4_MDROOT(518 B)
📄 BERI_DE4_SDROOT(365 B)
📄 BERI_NETFPGA_MDROOT(786 B)
📄 BERI_SIM_BASE(382 B)
📄 BERI_SIM_MDROOT(481 B)
📄 BERI_SIM_SDROOT(348 B)
📄 BERI_SIM_VIRTIO(413 B)
📄 BERI_SOCKIT(566 B)
📄 BERI_TPAD.hints(1.5 KB)
📄 CANNA(602 B)
📄 CARAMBOLA2(1.14 KB)
📄 CARAMBOLA2.hints(3.2 KB)
📄 CI20(682 B)
📄 DB120(1.12 KB)
📄 DB120.hints(4.54 KB)
📄 DEFAULTS(162 B)
📄 DIR-655A1(1.25 KB)
📄 DIR-655A1.hints(4.98 KB)
📄 DIR-825B1(1.3 KB)
📄 DIR-825B1.hints(3.63 KB)
📄 DIR-825C1(1.51 KB)
📄 DIR-825C1.hints(4.21 KB)
📄 ENH200(1.04 KB)
📄 ENH200.hints(3.32 KB)
📄 ERL(8.33 KB)
📄 JZ4780(2.91 KB)
📄 JZ4780.hints(27 B)
📄 MALTA(163 B)
📄 MALTA.hints(112 B)
📄 MALTA64(243 B)
📄 MALTA64EL(190 B)
📄 MALTAEL(168 B)
📄 MT7620.hints(3.26 KB)
📄 MT7620A_FDT(1.35 KB)
📄 MT7620N_FDT(1.33 KB)
📄 MT7621_FDT(1.33 KB)
📄 MT7628_FDT(1.38 KB)
📄 OCTEON1(8.95 KB)
📄 OCTEON1.hints(303 B)
📄 ONIONOMEGA(1.07 KB)
📄 ONIONOMEGA.hints(3.33 KB)
📄 PB47(945 B)
📄 PB47.hints(1.87 KB)
📄 PB92(3.3 KB)
📄 PB92.hints(2.46 KB)
📄 PICOSTATION_M2HP(1.57 KB)
📄 PICOSTATION_M2HP.hints(2.8 KB)
📄 QCA953X_BASE(2.25 KB)
📄 QCA953X_BASE.hints(2.08 KB)
📄 QCA955X_BASE.hints(2.11 KB)
📄 ROCKET_M2HP(1.55 KB)
📄 ROCKET_M2HP.hints(2.79 KB)
📄 ROUTERSTATION(503 B)
📄 ROUTERSTATION.hints(1.04 KB)
📄 ROUTERSTATION_MFS(349 B)
📄 RSPRO(521 B)
📄 RSPRO.hints(1.19 KB)
📄 RSPRO_MFS(441 B)
📄 RSPRO_STANDALONE(476 B)
📄 RT2880_FDT(1.36 KB)
📄 RT3050_FDT(1.37 KB)
📄 RT305X.hints(3.09 KB)
📄 RT3352_FDT(1.33 KB)
📄 RT3883_FDT(1.46 KB)
📄 RT5350.hints(826 B)
📄 RT5350_FDT(1.33 KB)
📄 TL-ARCHERC7V2(1.7 KB)
📄 TL-ARCHERC7V2.hints(5.58 KB)
📄 TL-WDR4300(1.31 KB)
📄 TL-WDR4300.hints(6.23 KB)
📄 TL-WR1043NDv2(1.23 KB)
📄 TL-WR1043NDv2.hints(4.52 KB)
📄 TL-WR740Nv4(1.13 KB)
📄 TL-WR740Nv4.hints(2.38 KB)
📄 TP-MR3020(1.19 KB)
📄 TP-MR3020.hints(2.4 KB)
📄 TP-MR3040(1.84 KB)
📄 TP-MR3040.hints(2.53 KB)
📄 TP-WN1043ND(1.38 KB)
📄 TP-WN1043ND.hints(3.24 KB)
📄 WZR-300HP(1.11 KB)
📄 WZR-300HP.hints(5.54 KB)
📄 WZR-HPAG300H(1.15 KB)
📄 WZR-HPAG300H.hints(3.35 KB)
📄 X1000(2.46 KB)
📄 X1000.hints(27 B)
📄 XLP.hints(114 B)
📄 XLP64(984 B)
📄 XLPN32(1.02 KB)
📄 std.AR5312(1.73 KB)
📄 std.AR5315(1.71 KB)
📄 std.AR724X(1.74 KB)
📄 std.AR91XX(1.78 KB)
📄 std.AR933X(2.06 KB)
📄 std.AR934X(2.05 KB)
📄 std.AR_MIPS_BASE(2.33 KB)
📄 std.BERI(1.41 KB)
📄 std.MALTA(1.96 KB)
📄 std.QCA955X(2.1 KB)
📄 std.XLP(2.72 KB)

Editing: WZR-300HP.hints

# $FreeBSD$

# arge0 is connected to the LAN side of the switch PHY.
# arge1 is connected to the single port WAN side of the switch PHY.

# arge1 MDIO bus
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0

hint.arge.0.phymask=0x1
hint.arge.0.media=1000
hint.arge.0.fduplex=1
hint.arge.0.eeprommac=0x1f05120c
hint.arge.0.mdio=mdioproxy1     # .. off of the switch mdiobus

# arge1: nail to 1000/full, RMII - connected to the switch
#hint.arge.1.media=1000          # Map to 1000/full
#hint.arge.1.fduplex=1           #
#hint.arge.1.phymask=0x0         # no directly mapped PHYs

#
# AR7240 switch config
#
hint.arswitch.0.at="mdio0"
hint.arswitch.0.is_7240=1       # We need to be explicitly told this
hint.arswitch.0.numphys=4       # 4 active switch PHYs (PHY 0 -> 3)
hint.arswitch.0.phy4cpu=1       # Yes, PHY 4 == dedicated PHY
hint.arswitch.0.is_rgmii=1      # No, not RGMII
hint.arswitch.0.is_gmii=0       # No, not GMII

# ath0 - slot 0
hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1f051000
hint.pcib.0.bus.0.0.0.ath_fixup_size=4096

# .. and now, telling each ath(4) NIC where to find the firmware
# image.
hint.ath.0.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"

# Inherited from AR724X_BASE.hints
#hint.mx25l.0.at="spibus0"
#hint.mx25l.0.cs=0
# This board has two 16 MB flash devices on difference Chip Select pins
hint.mx25l.1.at="spibus0"
hint.mx25l.1.cs=1

# Geom MAP

# The WRZ-300HP has 2 16MB flash part - HOWEVER, the 64k caldata isn't
# at the end of the flash. It's ~ 328KB into the flash image.

# mtdparts=ar7240-nor0:
#  256k(u-boot)
#   64k(u-boot-env)
#   64k@320k(ART)
# 1152k@384k(uImage)
# 6592k@1536k(rootfs)
#   64k@8128k(properties)

# Uboot lies like a lying liar.  OpenWRT does this:
# [    0.570000] Concatenating MTD devices:
# [    0.570000] (0): "spi0.0"
# [    0.570000] (1): "spi0.1"
# [    0.580000] into device "flash"
# [    0.580000] Creating 7 MTD partitions on "flash":
# [    0.590000] 0x000000000000-0x000000040000 : "u-boot"
# [    0.600000] 0x000000040000-0x000000050000 : "u-boot-env"
# [    0.600000] 0x000000050000-0x000000060000 : "art"
# [    0.610000] 0x000000060000-0x000000160000 : "kernel"
# [    0.620000] 0x000000160000-0x000001ff0000 : "rootfs"
# [    0.620000] mtd: partition "rootfs" set to be root filesystem
# [    0.630000] mtd: partition "rootfs_data" created automatically, ofs=330000, len=1CC0000 
# [    0.640000] 0x000000330000-0x000001ff0000 : "rootfs_data"
# [    0.650000] 0x000001ff0000-0x000002000000 : "user_property"
# [    0.650000] 0x000000060000-0x000001ff0000 : "firmware"

hint.map.0.at="flash/spi0"
hint.map.0.start=0x00000000
hint.map.0.end=  0x00040000
hint.map.0.name="uboot"
hint.map.0.readonly=1

hint.map.1.at="flash/spi0"
hint.map.1.start=0x00040000
hint.map.1.end=  0x00050000       # 64k u-boot-env
hint.map.1.name="u-boot-env"
hint.map.1.readonly=1

hint.map.2.at="flash/spi0"
hint.map.2.start=0x00050000
hint.map.2.end=  0x00060000       # 64k ART
hint.map.2.name="ART"
hint.map.2.readonly=1

hint.map.3.at="flash/spi0"
hint.map.3.start=0x00060000
hint.map.3.end=  "search:0x00100000:0x10000:.!/bin/sh"
hint.map.3.name="kernel"
hint.map.3.readonly=1

hint.map.4.at="flash/spi0"
hint.map.4.start="search:0x00100000:0x10000:.!/bin/sh"
hint.map.4.end=  0x00FF0000
hint.map.4.name="rootfs"
hint.map.4.readonly=1

#hint.map.5.at="flash/spi1"
hint.map.5.at="flash/spi1"
hint.map.5.start=0x00FF0000
hint.map.5.end=  0x01000000
hint.map.5.name="cfg"
hint.map.5.readonly=0

# GPIO specific configuration block

#define GPIO_PIN_INPUT          0x0001  /* input direction */
#define GPIO_PIN_OUTPUT         0x0002  /* output direction */
#define GPIO_PIN_OPENDRAIN      0x0004  /* open-drain output */
#define GPIO_PIN_PUSHPULL       0x0008  /* push-pull output */
#define GPIO_PIN_TRISTATE       0x0010  /* output disabled */
#define GPIO_PIN_PULLUP         0x0020  /* internal pull-up enabled */
#define GPIO_PIN_PULLDOWN       0x0040  /* internal pull-down enabled */
#define GPIO_PIN_INVIN          0x0080  /* invert input */
#define GPIO_PIN_INVOUT         0x0100  /* invert output */
#define GPIO_PIN_PULSATE        0x0200  /* pulsate in hardware */
  
# Pin 1  - SCK
# Pin 2  - SDA
# Pin 3  - test 2
# Pin 4  - test 3
# Pin 5  - USB (LED Blue)
# Pin 6  - test a
# Pin 7  - Security (LED Orange)
# Pin 8  - Router (LED Green)
# Pin 9  - Movie Engine On (LED Blue)
# Pin 10 - Movie Engine Off (LED Blue)
# Pin 11 - test a
# Pin 12 - test a
# Pin 13 - test a
# Pin 14 - USB Power (turn on by default)
# Pin 15 - test a
# Pin 16 - test a
# Pin 17 - diag (LED red)

# Don't flip on anything that isn't already enabled.
# Force on USB power pin 14
#hint.gpio.0.function_set=0x00000000
#hint.gpio.0.function_clear=0x00000000

# These are the GPIO LEDs and buttons which can be software controlled.
hint.gpio.0.pinmask=0x000103D0

hint.gpio.0.pinon=0x00000000

hint.gpioiic.0.at="gpiobus0"
hint.gpioiic.0.pins=0x0003
hint.gpioiic.0.sda=0
hint.gpioiic.0.scl=1

# LEDs are configured separately and driven by the LED device
# usb tested good
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="blue-usb"
hint.gpioled.0.pins=0x00000010

hint.gpioled.1.at="gpiobus0"
hint.gpioled.1.name="orange-security"
hint.gpioled.1.pins=0x00000040

hint.gpioled.2.at="gpiobus0"
hint.gpioled.2.name="green-router"
hint.gpioled.2.pins=0x00000080

hint.gpioled.3.at="gpiobus0"
hint.gpioled.3.name="blue-movie-engine-on"
hint.gpioled.3.pins=0x00000100

hint.gpioled.4.at="gpiobus0"
hint.gpioled.4.name="blue-movie-engine-off"
hint.gpioled.4.pins=0x00000200

hint.gpioled.5.at="gpiobus0"
hint.gpioled.5.name="red-diag"
hint.gpioled.5.pins=0x00010000

003 File Manager

Editing: WZR-300HP.hints

Upload File

Create Folder