File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/Bindings/input/touchscreen

usr / src / sys / contrib / device-tree / Bindings / input / touchscreen /

📁 ..
📄 ad7879.txt(2.27 KB)
📄 ads7846.txt(3.6 KB)
📄 ar1021.txt(350 B)
📄 auo_pixcir_ts.txt(667 B)
📄 brcm,iproc-touchscreen.txt(3.28 KB)
📄 bu21013.txt(1.59 KB)
📄 bu21029.txt(1.1 KB)
📄 chipone_icn8318.txt(1.41 KB)
📄 colibri-vf50-ts.txt(1.29 KB)
📄 cypress,cy8ctma140.yaml(1.58 KB)
📄 cyttsp.txt(3.12 KB)
📄 edt-ft5x06.yaml(2.78 KB)
📄 eeti,exc3000.yaml(1.29 KB)
📄 eeti.txt(774 B)
📄 egalax-ts.txt(428 B)
📄 ektf2127.txt(736 B)
📄 elan,elants_i2c.yaml(1.36 KB)
📄 exc3000.txt(676 B)
📄 fsl-mx25-tcq.txt(1.29 KB)
📄 goodix.yaml(1.52 KB)
📄 hideep.txt(1.17 KB)
📄 imx6ul_tsc.txt(1.43 KB)
📄 iqs5xx.txt(2.22 KB)
📄 lpc32xx-tsc.txt(376 B)
📄 max11801-ts.txt(373 B)
📄 melfas_mip4.txt(517 B)
📄 mms114.txt(977 B)
📄 pixcir_i2c_ts.txt(857 B)
📄 raspberrypi,firmware-ts.txt(680 B)
📄 resistive-adc-touch.txt(1.15 KB)
📄 samsung,s6sy761.txt(849 B)
📄 silead_gsl1680.txt(1.52 KB)
📄 sis_i2c.txt(980 B)
📄 sitronix-st1232.txt(536 B)
📄 st,stmfts.txt(1.11 KB)
📄 stmpe.txt(2.55 KB)
📄 sx8654.txt(542 B)
📄 ti-tsc-adc.txt(3.45 KB)
📄 touchscreen.txt(21 B)
📄 touchscreen.yaml(2.66 KB)
📄 ts4800-ts.txt(438 B)
📄 tsc2005.txt(1.71 KB)
📄 tsc2007.txt(1.25 KB)
📄 zet6223.txt(817 B)
📄 zforce_ts.txt(784 B)

Editing: brcm,iproc-touchscreen.txt

* Broadcom's IPROC Touchscreen Controller

Required properties:
- compatible: must be "brcm,iproc-touchscreen"
- ts_syscon: handler of syscon node defining physical base
  address of the controller and length of memory mapped region.
  If this property is selected please make sure MFD_SYSCON config
  is enabled in the defconfig file.
- clocks:  The clock provided by the SOC to driver the tsc
- clock-names:  name for the clock
- interrupts: The touchscreen controller's interrupt
- address-cells: Specify the number of u32 entries needed in child nodes.
  Should set to 1.
- size-cells: Specify number of u32 entries needed to specify child nodes size
  in reg property. Should set to 1.

Optional properties:
- scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
- debounce_timeout: Each step is 512 us.  Valid 0-255
- settling_timeout: The settling duration (in ms) is the amount of time
                    the tsc waits to allow the voltage to settle after
                    turning on the drivers in detection mode.
                    Valid values: 0-11
                    0 =  0.008 ms
                    1 =  0.01 ms
                    2 =  0.02 ms
                    3 =  0.04 ms
                    4 =  0.08 ms
                    5 =  0.16 ms
                    6 =  0.32 ms
                    7 =  0.64 ms
                    8 =  1.28 ms
                    9 =  2.56 ms
                   10 =  5.12 ms
                   11 = 10.24 ms
- touch_timeout: The continuous number of scan periods in which touch is
                not detected before the controller returns to idle state.
                Valid values 0-255.
- average_data: Number of data samples which are averaged before a final
                data point is placed into the FIFO
                Valid values 0-7
                0 =   1 sample
                1 =   2 samples
                2 =   4 samples
                3 =   8 samples
                4 =  16 samples
                5 =  32 samples
                6 =  64 samples
                7 = 128 samples
- fifo_threshold: Interrupt is generated whenever the number of fifo
                entries exceeds this value
                Valid values 0-31
- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
- touchscreen-fuzz-x: horizontal noise value of the absolute input
                      device (in pixels)
- touchscreen-fuzz-y: vertical noise value of the absolute input
                      device (in pixels)
- touchscreen-inverted-x: X axis is inverted (boolean)
- touchscreen-inverted-y: Y axis is inverted (boolean)

Example: An example of touchscreen node

ts_adc_syscon: ts_adc_syscon@180a6000 {
		compatible = "brcm,iproc-ts-adc-syscon","syscon";
		reg = <0x180a6000 0xc30>;
	};

touchscreen: touchscreen@180a6000 {
		compatible = "brcm,iproc-touchscreen";
		#address-cells = <1>;
		#size-cells = <1>;
		ts_syscon = <&ts_adc_syscon>;
		clocks = <&adc_clk>;
		clock-names = "tsc_clk";
		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;

scanning_period = <5>;
		debounce_timeout = <40>;
		settling_timeout = <7>;
		touch_timeout = <10>;
		average_data = <5>;
		fifo_threshold = <1>;
		/* Touchscreen is rotated 180 degrees. */
		touchscreen-inverted-x;
		touchscreen-inverted-y;
	};

003 File Manager

Editing: brcm,iproc-touchscreen.txt

Upload File

Create Folder