003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/net/ieee802154
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
net
/
ieee802154
/
📁
..
📄
adf7242.txt
(489 B)
📄
at86rf230.txt
(831 B)
📄
ca8210.txt
(934 B)
📄
cc2520.txt
(1.04 KB)
📄
mcr20a.txt
(612 B)
📄
mrf24j40.txt
(538 B)
Editing: cc2520.txt
*CC2520 IEEE 802.15.4 Compatible Radio* Required properties: - compatible: should be "ti,cc2520" - spi-max-frequency: maximal bus speed (8000000), should be set to 4000000 depends sync or async operation mode - reg: the chipselect index - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - fifo-gpio: GPIO spec for the FIFO pin - fifop-gpio: GPIO spec for the FIFOP pin - sfd-gpio: GPIO spec for the SFD pin - cca-gpio: GPIO spec for the CCA pin - vreg-gpio: GPIO spec for the VREG pin - reset-gpio: GPIO spec for the RESET pin Optional properties: - amplified: include if the CC2520 is connected to a CC2591 amplifier Example: cc2520@0 { compatible = "ti,cc2520"; reg = <0>; spi-max-frequency = <4000000>; amplified; pinctrl-names = "default"; pinctrl-0 = <&cc2520_cape_pins>; fifo-gpio = <&gpio1 18 0>; fifop-gpio = <&gpio1 19 0>; sfd-gpio = <&gpio1 13 0>; cca-gpio = <&gpio1 16 0>; vreg-gpio = <&gpio0 31 0>; reset-gpio = <&gpio1 12 0>; };
Upload File
Create Folder