003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/input/touchscreen
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
input
/
touchscreen
/
📁
..
📄
ad7879.txt
(2.27 KB)
📄
ads7846.txt
(3.6 KB)
📄
ar1021.txt
(350 B)
📄
auo_pixcir_ts.txt
(667 B)
📄
brcm,iproc-touchscreen.txt
(3.28 KB)
📄
bu21013.txt
(1.59 KB)
📄
bu21029.txt
(1.1 KB)
📄
chipone_icn8318.txt
(1.41 KB)
📄
colibri-vf50-ts.txt
(1.29 KB)
📄
cypress,cy8ctma140.yaml
(1.58 KB)
📄
cyttsp.txt
(3.12 KB)
📄
edt-ft5x06.yaml
(2.78 KB)
📄
eeti,exc3000.yaml
(1.29 KB)
📄
eeti.txt
(774 B)
📄
egalax-ts.txt
(428 B)
📄
ektf2127.txt
(736 B)
📄
elan,elants_i2c.yaml
(1.36 KB)
📄
exc3000.txt
(676 B)
📄
fsl-mx25-tcq.txt
(1.29 KB)
📄
goodix.yaml
(1.52 KB)
📄
hideep.txt
(1.17 KB)
📄
imx6ul_tsc.txt
(1.43 KB)
📄
iqs5xx.txt
(2.22 KB)
📄
lpc32xx-tsc.txt
(376 B)
📄
max11801-ts.txt
(373 B)
📄
melfas_mip4.txt
(517 B)
📄
mms114.txt
(977 B)
📄
pixcir_i2c_ts.txt
(857 B)
📄
raspberrypi,firmware-ts.txt
(680 B)
📄
resistive-adc-touch.txt
(1.15 KB)
📄
samsung,s6sy761.txt
(849 B)
📄
silead_gsl1680.txt
(1.52 KB)
📄
sis_i2c.txt
(980 B)
📄
sitronix-st1232.txt
(536 B)
📄
st,stmfts.txt
(1.11 KB)
📄
stmpe.txt
(2.55 KB)
📄
sx8654.txt
(542 B)
📄
ti-tsc-adc.txt
(3.45 KB)
📄
touchscreen.txt
(21 B)
📄
touchscreen.yaml
(2.66 KB)
📄
ts4800-ts.txt
(438 B)
📄
tsc2005.txt
(1.71 KB)
📄
tsc2007.txt
(1.25 KB)
📄
zet6223.txt
(817 B)
📄
zforce_ts.txt
(784 B)
Editing: chipone_icn8318.txt
* ChipOne icn8318 I2C touchscreen controller Required properties: - compatible : "chipone,icn8318" - reg : I2C slave address of the chip (0x40) - interrupts : interrupt specification for the icn8318 interrupt - wake-gpios : GPIO specification for the WAKE input - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - touchscreen-size-y : vertical resolution of touchscreen (in pixels) Optional properties: - pinctrl-names : should be "default" - pinctrl-0: : a phandle pointing to the pin settings for the control gpios - touchscreen-fuzz-x : horizontal noise value of the absolute input device (in pixels) - touchscreen-fuzz-y : vertical noise value of the absolute input device (in pixels) - touchscreen-inverted-x : X axis is inverted (boolean) - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) Swapping is done after inverting the axis Example: i2c@00000000 { /* ... */ chipone_icn8318@40 { compatible = "chipone,icn8318"; reg = <0x40>; interrupt-parent = <&pio>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ pinctrl-names = "default"; pinctrl-0 = <&ts_wake_pin_p66>; wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ touchscreen-size-x = <800>; touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-swapped-x-y; }; /* ... */ };
Upload File
Create Folder