003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/ata
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
ata
/
📁
..
📄
ahci-ceva.txt
(2.59 KB)
📄
ahci-da850.txt
(645 B)
📄
ahci-dm816.txt
(790 B)
📄
ahci-fsl-qoriq.txt
(768 B)
📄
ahci-mtk.txt
(2.01 KB)
📄
ahci-platform.txt
(2.42 KB)
📄
ahci-st.txt
(1.2 KB)
📄
allwinner,sun4i-a10-ahci.yaml
(928 B)
📄
allwinner,sun8i-r40-ahci.yaml
(1.35 KB)
📄
apm-xgene.txt
(2.23 KB)
📄
atmel-at91_cf.txt
(534 B)
📄
brcm,sata-brcm.txt
(1.1 KB)
📄
cavium-compact-flash.txt
(911 B)
📄
cortina,gemini-sata-bridge.txt
(2.01 KB)
📄
exynos-sata.txt
(945 B)
📄
faraday,ftide010.yaml
(1.97 KB)
📄
fsl-sata.txt
(897 B)
📄
imx-pata.txt
(389 B)
📄
imx-sata.txt
(1.34 KB)
📄
marvell.txt
(567 B)
📄
nvidia,tegra124-ahci.txt
(1.46 KB)
📄
pata-arasan.txt
(988 B)
📄
pata-common.yaml
(1.39 KB)
📄
qcom-sata.txt
(1.42 KB)
📄
renesas,rcar-sata.yaml
(1.8 KB)
📄
sata-common.yaml
(1.35 KB)
📄
sata_highbank.yaml
(2.47 KB)
Editing: exynos-sata.txt
* Samsung AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: - compatible : compatible list, contains "samsung,exynos5-sata" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping> - samsung,sata-freq : <frequency in MHz> - phys : Must contain exactly one entry as specified in phy-bindings.txt - phy-names : Must be "sata-phy" Optional properties: - clocks : Must contain an entry for each entry in clock-names. - clock-names : Shall be "sata" for the external SATA bus clock, and "sclk_sata" for the internal controller clock. Example: sata@122f0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122f0000 0x1ff>; interrupts = <0 115 0>; clocks = <&clock 277>, <&clock 143>; clock-names = "sata", "sclk_sata"; phys = <&sata_phy>; phy-names = "sata-phy"; };
Upload File
Create Folder