003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/clock/ti
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
clock
/
ti
/
📁
..
📄
adpll.txt
(1.4 KB)
📄
apll.txt
(1.78 KB)
📄
autoidle.txt
(1.2 KB)
📄
clockdomain.txt
(880 B)
📄
composite.txt
(1.59 KB)
📁
davinci
📄
divider.txt
(3.68 KB)
📄
dpll.txt
(2.86 KB)
📄
dra7-atl.txt
(2.81 KB)
📄
fapll.txt
(1.04 KB)
📄
fixed-factor-clock.txt
(1.27 KB)
📄
gate.txt
(3.26 KB)
📄
interface.txt
(1.96 KB)
📄
mux.txt
(2.58 KB)
Editing: fixed-factor-clock.txt
Binding for TI fixed factor rate clock sources. Binding status: Unstable - ABI compatibility may be broken in the future This binding uses the common clock binding[1], and also uses the autoidle support from TI autoidle clock [2]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/clock/ti/autoidle.txt Required properties: - compatible : shall be "ti,fixed-factor-clock". - #clock-cells : from common clock binding; shall be set to 0. - ti,clock-div: fixed divider. - ti,clock-mult: fixed multiplier. - clocks: parent clock. Optional properties: - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, see [2] - reg: offset for the autoidle register of this clock, see [2] - ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2] - ti,set-rate-parent: clk_set_rate is propagated to parent Example: clock { compatible = "ti,fixed-factor-clock"; clocks = <&parentclk>; #clock-cells = <0>; ti,clock-div = <2>; ti,clock-mult = <1>; }; dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { #clock-cells = <0>; compatible = "ti,fixed-factor-clock"; clocks = <&dpll_usb_ck>; ti,clock-div = <1>; ti,autoidle-shift = <8>; reg = <0x01b4>; ti,clock-mult = <1>; ti,invert-autoidle-bit; };
Upload File
Create Folder