File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/powerpc

usr / src / sys / contrib / device-tree / src / powerpc /

📁 ..
📄 a3m071.dts(2.4 KB)
📄 a4m072.dts(3.03 KB)
📄 ac14xx.dts(7.71 KB)
📄 acadia.dts(5.06 KB)
📄 adder875-redboot.dts(3.72 KB)
📄 adder875-uboot.dts(3.69 KB)
📄 akebono.dts(12.21 KB)
📄 amigaone.dts(3.87 KB)
📄 arches.dts(8.41 KB)
📄 asp834x-redboot.dts(6.52 KB)
📄 bamboo.dts(7.75 KB)
📄 bluestone.dts(9.66 KB)
📄 canyonlands.dts(15.39 KB)
📄 charon.dts(5.01 KB)
📄 cm5200.dts(1.31 KB)
📄 currituck.dts(7.28 KB)
📄 digsy_mtc.dts(2.84 KB)
📄 ebony.dts(8.22 KB)
📄 eiger.dts(10.5 KB)
📄 ep8248e.dts(4.36 KB)
📄 ep88xc.dts(4.4 KB)
📁 fsl
📄 fsp2.dts(12.79 KB)
📄 gamecube.dts(2.2 KB)
📄 glacier.dts(15.87 KB)
📄 haleakala.dts(7.41 KB)
📄 holly.dts(4.8 KB)
📄 hotfoot.dts(7 KB)
📄 icon.dts(12.33 KB)
📄 iss4xx-mpic.dts(3.75 KB)
📄 iss4xx.dts(2.79 KB)
📄 katmai.dts(14.24 KB)
📄 kilauea.dts(11.5 KB)
📄 klondike.dts(4.88 KB)
📄 kmeter1.dts(13.19 KB)
📄 ksi8560.dts(7.59 KB)
📄 kuroboxHD.dts(3.67 KB)
📄 kuroboxHG.dts(3.68 KB)
📄 lite5200.dts(6.53 KB)
📄 lite5200b.dts(3.11 KB)
📄 makalu.dts(9.8 KB)
📄 media5200.dts(3.15 KB)
📄 mgcoge.dts(5.76 KB)
📄 motionpro.dts(2.41 KB)
📄 mpc5121.dtsi(11.75 KB)
📄 mpc5121ads.dts(3.38 KB)
📄 mpc5125twr.dts(6.55 KB)
📄 mpc5200b.dtsi(7.14 KB)
📄 mpc7448hpc2.dts(4.19 KB)
📄 mpc8272ads.dts(6.2 KB)
📄 mpc8308_p1m.dts(6.94 KB)
📄 mpc8308rdb.dts(6.49 KB)
📄 mpc8313erdb.dts(9.09 KB)
📄 mpc8315erdb.dts(10.71 KB)
📄 mpc832x_mds.dts(10.5 KB)
📄 mpc832x_rdb.dts(8.51 KB)
📄 mpc8349emitx.dts(9.31 KB)
📄 mpc8349emitxgp.dts(5.49 KB)
📄 mpc834x_mds.dts(9.53 KB)
📄 mpc836x_mds.dts(11.38 KB)
📄 mpc836x_rdk.dts(10.35 KB)
📄 mpc8377_mds.dts(11.28 KB)
📄 mpc8377_rdb.dts(11.12 KB)
📄 mpc8377_wlan.dts(10.24 KB)
📄 mpc8378_mds.dts(10.91 KB)
📄 mpc8378_rdb.dts(10.75 KB)
📄 mpc8379_mds.dts(9.98 KB)
📄 mpc8379_rdb.dts(9.83 KB)
📄 mpc8610_hpcd.dts(11.01 KB)
📄 mpc866ads.dts(3.92 KB)
📄 mpc885ads.dts(5.09 KB)
📄 mucmc52.dts(4.58 KB)
📄 mvme5100.dts(4.35 KB)
📄 o2d.dts(783 B)
📄 o2d.dtsi(2.08 KB)
📄 o2d300.dts(932 B)
📄 o2dnt2.dts(796 B)
📄 o2i.dts(505 B)
📄 o2mnt.dts(517 B)
📄 o3dnt.dts(791 B)
📄 obs600.dts(7.85 KB)
📄 pcm030.dts(2.19 KB)
📄 pcm032.dts(3.64 KB)
📄 pdm360ng.dts(3.39 KB)
📄 pq2fads.dts(5.69 KB)
📄 ps3.dts(1.25 KB)
📄 rainier.dts(8.83 KB)
📄 redwood.dts(10.7 KB)
📄 sam440ep.dts(7.24 KB)
📄 sbc8548-altflash.dts(2.3 KB)
📄 sbc8548-post.dtsi(6.82 KB)
📄 sbc8548-pre.dtsi(903 B)
📄 sbc8548.dts(2.17 KB)
📄 sequoia.dts(10.42 KB)
📄 socrates.dts(7.3 KB)
📄 storcenter.dts(3.12 KB)
📄 stx_gp3_8560.dts(6.41 KB)
📄 stxssa8555.dts(8.66 KB)
📄 taishan.dts(10.58 KB)
📄 tqm5200.dts(4.47 KB)
📄 tqm8540.dts(7.23 KB)
📄 tqm8541.dts(6.9 KB)
📄 tqm8548-bigflash.dts(10.95 KB)
📄 tqm8548.dts(10.95 KB)
📄 tqm8555.dts(6.9 KB)
📄 tqm8560.dts(8.58 KB)
📄 tqm8xx.dts(4 KB)
📄 uc101.dts(2.55 KB)
📄 warp.dts(7.03 KB)
📄 wii.dts(5.56 KB)
📄 xcalibur1501.dts(15.41 KB)
📄 xpedite5200.dts(9.96 KB)
📄 xpedite5200_xmon.dts(10.97 KB)
📄 xpedite5301.dts(14.24 KB)
📄 xpedite5330.dts(15.53 KB)
📄 xpedite5370.dts(14.16 KB)
📄 yosemite.dts(8.22 KB)

Editing: hotfoot.dts

/*
 * Device Tree Source for ESTeem 195E Hotfoot
 *
 * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without
 * any warranty of any kind, whether express or implied.
 */

/dts-v1/;

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	model = "est,hotfoot";
	compatible = "est,hotfoot";
	dcr-parent = <&{/cpus/cpu@0}>;

aliases {
		ethernet0 = &EMAC0;
		ethernet1 = &EMAC1;
		serial0 = &UART0;
		serial1 = &UART1;
	};

cpus {
		#address-cells = <1>;
		#size-cells = <0>;

cpu@0 {
			device_type = "cpu";
			model = "PowerPC,405EP";
			reg = <0x00000000>;
			clock-frequency = <0>; /* Filled in by zImage */
			timebase-frequency = <0>; /* Filled in by zImage */
			i-cache-line-size = <0x20>;
			d-cache-line-size = <0x20>;
			i-cache-size = <0x4000>;
			d-cache-size = <0x4000>;
			dcr-controller;
			dcr-access-method = "native";
		};
	};

memory {
		device_type = "memory";
		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
	};

UIC0: interrupt-controller {
		compatible = "ibm,uic";
		interrupt-controller;
		cell-index = <0>;
		dcr-reg = <0x0c0 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
	};

plb {
		compatible = "ibm,plb3";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		clock-frequency = <0>; /* Filled in by zImage */

SDRAM0: memory-controller {
			compatible = "ibm,sdram-405ep";
			dcr-reg = <0x010 0x002>;
		};

MAL: mcmal {
			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
			dcr-reg = <0x180 0x062>;
			num-tx-chans = <4>;
			num-rx-chans = <2>;
			interrupt-parent = <&UIC0>;
			interrupts = <
				0xb 0x4 /* TXEOB */
				0xc 0x4 /* RXEOB */
				0xa 0x4 /* SERR */
				0xd 0x4 /* TXDE */
				0xe 0x4 /* RXDE */>;
		};

POB0: opb {
			compatible = "ibm,opb-405ep", "ibm,opb";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0xef600000 0xef600000 0x00a00000>;
			dcr-reg = <0x0a0 0x005>;
			clock-frequency = <0>; /* Filled in by zImage */

/* Hotfoot has UART0/UART1 swapped */

UART0: serial@ef600400 {
				device_type = "serial";
				compatible = "ns16550";
				reg = <0xef600400 0x00000008>;
				virtual-reg = <0xef600400>;
				clock-frequency = <0>; /* Filled in by zImage */
				current-speed = <0x9600>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x1 0x4>;
			};

UART1: serial@ef600300 {
				device_type = "serial";
				compatible = "ns16550";
				reg = <0xef600300 0x00000008>;
				virtual-reg = <0xef600300>;
				clock-frequency = <0>; /* Filled in by zImage */
				current-speed = <0x9600>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x0 0x4>;
			};

IIC: i2c@ef600500 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "ibm,iic-405ep", "ibm,iic";
				reg = <0xef600500 0x00000011>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x2 0x4>;

rtc@68 {
					/* Actually a DS1339 */
					compatible = "dallas,ds1307";
					reg = <0x68>;
				};

temp@4a {
					/* Not present on all boards */
					compatible = "national,lm75";
					reg = <0x4a>;
				};
			};

GPIO: gpio@ef600700 {
				#gpio-cells = <2>;
				compatible = "ibm,ppc4xx-gpio";
				reg = <0xef600700 0x00000020>;
				gpio-controller;
			};

gpio-leds {
				compatible = "gpio-leds";
				status {
					label = "Status";
					gpios = <&GPIO 1 0>;
				};
				radiorx {
					label = "Rx";
					gpios = <&GPIO 0xe 0>;
				};
			};

EMAC0: ethernet@ef600800 {
				linux,network-index = <0x0>;
				device_type = "network";
				compatible = "ibm,emac-405ep", "ibm,emac";
				interrupt-parent = <&UIC0>;
				interrupts = <
					0xf 0x4 /* Ethernet */
					0x9 0x4 /* Ethernet Wake Up */>;
				local-mac-address = [000000000000]; /* Filled in by zImage */
				reg = <0xef600800 0x00000070>;
				mal-device = <&MAL>;
				mal-tx-channel = <0>;
				mal-rx-channel = <0>;
				cell-index = <0>;
				max-frame-size = <0x5dc>;
				rx-fifo-size = <0x1000>;
				tx-fifo-size = <0x800>;
				phy-mode = "mii";
				phy-map = <0x00000000>;
			};

EMAC1: ethernet@ef600900 {
				linux,network-index = <0x1>;
				device_type = "network";
				compatible = "ibm,emac-405ep", "ibm,emac";
				interrupt-parent = <&UIC0>;
				interrupts = <
					0x11 0x4 /* Ethernet */
					0x9 0x4 /* Ethernet Wake Up */>;
				local-mac-address = [000000000000]; /* Filled in by zImage */
				reg = <0xef600900 0x00000070>;
				mal-device = <&MAL>;
				mal-tx-channel = <2>;
				mal-rx-channel = <1>;
				cell-index = <1>;
				max-frame-size = <0x5dc>;
				rx-fifo-size = <0x1000>;
				tx-fifo-size = <0x800>;
				mdio-device = <&EMAC0>;
				phy-mode = "mii";
				phy-map = <0x0000001>;
			};
		};

EBC0: ebc {
			compatible = "ibm,ebc-405ep", "ibm,ebc";
			dcr-reg = <0x012 0x002>;
			#address-cells = <2>;
			#size-cells = <1>;

/* The ranges property is supplied by the bootwrapper
			 * and is based on the firmware's configuration of the
			 * EBC bridge
			 */
			clock-frequency = <0>; /* Filled in by zImage */

nor_flash@0 {
				compatible = "cfi-flash";
				bank-width = <2>;
				reg = <0x0 0xff800000 0x00800000>;
				#address-cells = <1>;
				#size-cells = <1>;

/* This mapping is for the 8M flash
				   4M flash has all ofssets -= 4M,
				   and FeatFS partition is not present */
				partition@0 {
					label = "Bootloader";
					reg = <0x7c0000 0x40000>;
					/* read-only; */
				};
				partition@1 {
					label = "Env_and_Config_Primary";
					reg = <0x400000 0x10000>;
				};
				partition@2 {
					label = "Kernel";
					reg = <0x420000 0x100000>;
				};
				partition@3 {
					label = "Filesystem";
					reg = <0x520000 0x2a0000>;
				};
				partition@4 {
					label = "Env_and_Config_Secondary";
					reg = <0x410000 0x10000>;
				};
				partition@5 {
					label = "FeatFS";
					reg = <0x000000 0x400000>;
				};
				partition@6 {
					label = "Bootloader_Env";
					reg = <0x7d0000 0x10000>;
				};
			};
		};

PCI0: pci@ec000000 {
			device_type = "pci";
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
			primary;
			reg = <0xeec00000 0x00000008    /* Config space access */
				0xeed80000 0x00000004    /* IACK */
				0xeed80000 0x00000004    /* Special cycle */
				0xef480000 0x00000040>;  /* Internal registers */

/* Outbound ranges, one memory and one IO,
			 * later cannot be changed. Chip supports a second
			 * IO range but we don't use it for now
			 */
			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;

/* Inbound 2GB range starting at 0 */
			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;

interrupt-parent = <&UIC0>;
			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8

/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
				>;
		};
	};

chosen {
		stdout-path = &UART0;
	};
};

003 File Manager

Editing: hotfoot.dts

Upload File

Create Folder