003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/input/touchscreen
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
input
/
touchscreen
/
📁
..
📄
ad7879.txt
(2.27 KB)
📄
ads7846.txt
(3.6 KB)
📄
ar1021.txt
(350 B)
📄
auo_pixcir_ts.txt
(667 B)
📄
brcm,iproc-touchscreen.txt
(3.28 KB)
📄
bu21013.txt
(1.59 KB)
📄
bu21029.txt
(1.1 KB)
📄
chipone_icn8318.txt
(1.41 KB)
📄
colibri-vf50-ts.txt
(1.29 KB)
📄
cypress,cy8ctma140.yaml
(1.58 KB)
📄
cyttsp.txt
(3.12 KB)
📄
edt-ft5x06.yaml
(2.78 KB)
📄
eeti,exc3000.yaml
(1.29 KB)
📄
eeti.txt
(774 B)
📄
egalax-ts.txt
(428 B)
📄
ektf2127.txt
(736 B)
📄
elan,elants_i2c.yaml
(1.36 KB)
📄
exc3000.txt
(676 B)
📄
fsl-mx25-tcq.txt
(1.29 KB)
📄
goodix.yaml
(1.52 KB)
📄
hideep.txt
(1.17 KB)
📄
imx6ul_tsc.txt
(1.43 KB)
📄
iqs5xx.txt
(2.22 KB)
📄
lpc32xx-tsc.txt
(376 B)
📄
max11801-ts.txt
(373 B)
📄
melfas_mip4.txt
(517 B)
📄
mms114.txt
(977 B)
📄
pixcir_i2c_ts.txt
(857 B)
📄
raspberrypi,firmware-ts.txt
(680 B)
📄
resistive-adc-touch.txt
(1.15 KB)
📄
samsung,s6sy761.txt
(849 B)
📄
silead_gsl1680.txt
(1.52 KB)
📄
sis_i2c.txt
(980 B)
📄
sitronix-st1232.txt
(536 B)
📄
st,stmfts.txt
(1.11 KB)
📄
stmpe.txt
(2.55 KB)
📄
sx8654.txt
(542 B)
📄
ti-tsc-adc.txt
(3.45 KB)
📄
touchscreen.txt
(21 B)
📄
touchscreen.yaml
(2.66 KB)
📄
ts4800-ts.txt
(438 B)
📄
tsc2005.txt
(1.71 KB)
📄
tsc2007.txt
(1.25 KB)
📄
zet6223.txt
(817 B)
📄
zforce_ts.txt
(784 B)
Editing: imx6ul_tsc.txt
* Freescale i.MX6UL Touch Controller Required properties: - compatible: must be "fsl,imx6ul-tsc". - reg: this touch controller address and the ADC2 address. - interrupts: the interrupt of this touch controller and ADC2. - clocks: the root clock of touch controller and ADC2. - clock-names; must be "tsc" and "adc". - xnur-gpio: the X- gpio this controller connect to. This xnur-gpio returns to low once the finger leave the touch screen (The last touch event the touch controller capture). Optional properties: - measure-delay-time: the value of measure delay time. Before X-axis or Y-axis measurement, the screen need some time before even potential distribution ready. This value depends on the touch screen. - pre-charge-time: the touch screen need some time to precharge. This value depends on the touch screen. - touchscreen-average-samples: Number of data samples which are averaged for each read. Valid values are 1, 4, 8, 16 and 32. Example: tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_IPG>, <&clks IMX6UL_CLK_ADC2>; clock-names = "tsc", "adc"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; touchscreen-average-samples = <32>; };
Upload File
Create Folder