File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/arm64/freescale

usr / src / sys / contrib / device-tree / src / arm64 / freescale /

📁 ..
📄 fsl-ls1012a-frdm.dts(1.77 KB)
📄 fsl-ls1012a-frwy.dts(619 B)
📄 fsl-ls1012a-oxalis.dts(1.61 KB)
📄 fsl-ls1012a-qds.dts(2.57 KB)
📄 fsl-ls1012a-rdb.dts(771 B)
📄 fsl-ls1012a.dtsi(13.52 KB)
📄 fsl-ls1028a-kontron-kbox-a-230-ls.dts(1.46 KB)
📄 fsl-ls1028a-kontron-sl28-var2.dts(1.34 KB)
📄 fsl-ls1028a-kontron-sl28-var3-ads2.dts(2.16 KB)
📄 fsl-ls1028a-kontron-sl28-var4.dts(1.05 KB)
📄 fsl-ls1028a-kontron-sl28.dts(2.9 KB)
📄 fsl-ls1028a-qds.dts(5.28 KB)
📄 fsl-ls1028a-rdb.dts(4.34 KB)
📄 fsl-ls1028a.dtsi(29.05 KB)
📄 fsl-ls1043-post.dtsi(780 B)
📄 fsl-ls1043a-qds.dts(2.41 KB)
📄 fsl-ls1043a-rdb.dts(3.65 KB)
📄 fsl-ls1043a.dtsi(22.32 KB)
📄 fsl-ls1046-post.dtsi(825 B)
📄 fsl-ls1046a-frwy.dts(2.51 KB)
📄 fsl-ls1046a-qds.dts(2.83 KB)
📄 fsl-ls1046a-rdb.dts(2.83 KB)
📄 fsl-ls1046a.dtsi(22.83 KB)
📄 fsl-ls1088a-qds.dts(2.61 KB)
📄 fsl-ls1088a-rdb.dts(1.82 KB)
📄 fsl-ls1088a.dtsi(22.01 KB)
📄 fsl-ls2080a-qds.dts(512 B)
📄 fsl-ls2080a-rdb.dts(507 B)
📄 fsl-ls2080a-simu.dts(542 B)
📄 fsl-ls2080a.dtsi(3.72 KB)
📄 fsl-ls2088a-qds.dts(458 B)
📄 fsl-ls2088a-rdb.dts(458 B)
📄 fsl-ls2088a.dtsi(3.61 KB)
📄 fsl-ls208xa-qds.dtsi(2.6 KB)
📄 fsl-ls208xa-rdb.dtsi(1.96 KB)
📄 fsl-ls208xa.dtsi(20.25 KB)
📄 fsl-lx2160a-cex7.dtsi(2.39 KB)
📄 fsl-lx2160a-clearfog-cx.dts(315 B)
📄 fsl-lx2160a-clearfog-itx.dtsi(692 B)
📄 fsl-lx2160a-honeycomb.dts(309 B)
📄 fsl-lx2160a-qds.dts(2.45 KB)
📄 fsl-lx2160a-rdb.dts(2.66 KB)
📄 fsl-lx2160a.dtsi(37.57 KB)
📄 imx8mm-beacon-baseboard.dtsi(6.28 KB)
📄 imx8mm-beacon-kit.dts(374 B)
📄 imx8mm-beacon-som.dtsi(9.83 KB)
📄 imx8mm-evk.dts(12.52 KB)
📄 imx8mm-pinfunc.h(63.02 KB)
📄 imx8mm.dtsi(27.25 KB)
📄 imx8mn-ddr4-evk.dts(3.12 KB)
📄 imx8mn-evk.dts(2.54 KB)
📄 imx8mn-evk.dtsi(8.1 KB)
📄 imx8mn-pinfunc.h(64.97 KB)
📄 imx8mn.dtsi(23.93 KB)
📄 imx8mp-evk.dts(6.75 KB)
📄 imx8mp-pinfunc.h(85.33 KB)
📄 imx8mp.dtsi(19.92 KB)
📄 imx8mq-evk.dts(11.98 KB)
📄 imx8mq-hummingboard-pulse.dts(5.94 KB)
📄 imx8mq-librem5-devkit.dts(21.7 KB)
📄 imx8mq-nitrogen.dts(10.51 KB)
📄 imx8mq-phanbell.dts(10.84 KB)
📄 imx8mq-pico-pi.dts(9.96 KB)
📄 imx8mq-pinfunc.h(60.77 KB)
📄 imx8mq-sr-som.dtsi(7.5 KB)
📄 imx8mq-thor96.dts(12.86 KB)
📄 imx8mq-zii-ultra-rmb3.dts(1.72 KB)
📄 imx8mq-zii-ultra-zest.dts(473 B)
📄 imx8mq-zii-ultra.dtsi(16.29 KB)
📄 imx8mq.dtsi(36.02 KB)
📄 imx8qxp-ai_ml.dts(5.86 KB)
📄 imx8qxp-colibri-eval-v3.dts(333 B)
📄 imx8qxp-colibri-eval-v3.dtsi(895 B)
📄 imx8qxp-colibri.dtsi(18.2 KB)
📄 imx8qxp-mek.dts(5.97 KB)
📄 imx8qxp.dtsi(16.6 KB)
📄 qoriq-bman-portals.dtsi(1.87 KB)
📄 qoriq-fman3-0-10g-0.dtsi(845 B)
📄 qoriq-fman3-0-10g-1.dtsi(845 B)
📄 qoriq-fman3-0-1g-0.dtsi(828 B)
📄 qoriq-fman3-0-1g-1.dtsi(828 B)
📄 qoriq-fman3-0-1g-2.dtsi(828 B)
📄 qoriq-fman3-0-1g-3.dtsi(828 B)
📄 qoriq-fman3-0-1g-4.dtsi(828 B)
📄 qoriq-fman3-0-1g-5.dtsi(828 B)
📄 qoriq-fman3-0.dtsi(1.8 KB)
📄 qoriq-qman-portals.dtsi(2.16 KB)
📄 s32v234-evb.dts(371 B)
📄 s32v234.dtsi(3.13 KB)

Editing: imx8mm-beacon-baseboard.dtsi

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright 2020 Compass Electronics Group, LLC
 */

/ {
	leds {
		compatible = "gpio-leds";

led0 {
			label = "gen_led0";
			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
			default-state = "none";
		};

led1 {
			label = "gen_led1";
			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
			default-state = "none";
		};

led2 {
			label = "gen_led2";
			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
			default-state = "none";
		};

led3 {
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_led3>;
			label = "heartbeat";
			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

reg_audio: regulator-audio {
		compatible = "regulator-fixed";
		regulator-name = "3v3_aud";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

sound {
		compatible = "fsl,imx-audio-wm8962";
		model = "wm8962-audio";
		audio-cpu = <&sai3>;
		audio-codec = <&wm8962>;
		audio-routing =
			"Headphone Jack", "HPOUTL",
			"Headphone Jack", "HPOUTR",
			"Ext Spk", "SPKOUTL",
			"Ext Spk", "SPKOUTR",
			"AMIC", "MICBIAS",
			"IN3R", "AMIC";
	};
};

&ecspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_espi2>;
	cs-gpios = <&gpio5 9 0>;
	status = "okay";

eeprom@0 {
		compatible = "microchip,at25160bn", "atmel,at25";
		reg = <0>;
		spi-max-frequency = <5000000>;
		spi-cpha;
		spi-cpol;
		pagesize = <32>;
		size = <2048>;
		address-width = <16>;
	};
};

&i2c2 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&i2c4 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c4>;
	status = "okay";

wm8962: audio-codec@1a {
		compatible = "wlf,wm8962";
		reg = <0x1a>;
		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
		clock-names = "xclk";
		DCVDD-supply = <&reg_audio>;
		DBVDD-supply = <&reg_audio>;
		AVDD-supply = <&reg_audio>;
		CPVDD-supply = <&reg_audio>;
		MICVDD-supply = <&reg_audio>;
		PLLVDD-supply = <&reg_audio>;
		SPKVDD1-supply = <&reg_audio>;
		SPKVDD2-supply = <&reg_audio>;
		gpio-cfg = <
			0x0000 /* 0:Default */
			0x0000 /* 1:Default */
			0x0000 /* 2:FN_DMICCLK */
			0x0000 /* 3:Default */
			0x0000 /* 4:FN_DMICCDAT */
			0x0000 /* 5:Default */
		>;
	};

pca6416_0: gpio@20 {
		compatible = "nxp,pcal6416";
		reg = <0x20>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pcal6414>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&gpio4>;
		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
	};

pca6416_1: gpio@21 {
		compatible = "nxp,pcal6416";
		reg = <0x21>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&gpio4>;
		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
	};
};

&sai3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai3>;
	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <24576000>;
	fsl,sai-mclk-direction-output;
	status = "okay";
};

&snvs_pwrkey {
	status = "okay";
};

&uart2 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
	bus-width = <4>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	status = "okay";
};

&iomuxc {
	pinctrl_espi2: espi2grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
		>;
	};

pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
		>;
	};

pinctrl_i2c4: i2c4grp {
		fsl,pins = <
			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
		>;
	};

pinctrl_led3: led3grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
		>;
	};

pinctrl_pcal6414: pcal6414-gpio {
		fsl,pins = <
			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
		>;
	};

pinctrl_sai3: sai3grp {
		fsl,pins = <
			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
		>;
	};

pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
		>;
	};

pinctrl_uart3: uart3grp {
		fsl,pins = <
			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
		>;
	};

pinctrl_usdhc2_gpio: usdhc2grpgpio {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
		>;
	};

pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};

pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};

pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
		fsl,pins = <
			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
		>;
	};
};

003 File Manager

Editing: imx8mm-beacon-baseboard.dtsi

Upload File

Create Folder