File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/Bindings/iio/imu

usr / src / sys / contrib / device-tree / Bindings / iio / imu /

📁 ..
📄 adi,adis16460.yaml(1.05 KB)
📄 adi,adis16475.yaml(3.04 KB)
📄 adi,adis16480.txt(2.86 KB)
📄 bosch,bmi160.yaml(2.19 KB)
📄 inv_mpu6050.txt(1.98 KB)
📄 invensense,icm42600.yaml(2.33 KB)
📄 nxp,fxos8700.yaml(1.63 KB)
📄 st_lsm6dsx.txt(1.54 KB)

Editing: invensense,icm42600.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: InvenSense ICM-426xx Inertial Measurement Unit

maintainers:
  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>

description: |
  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
  accelerometer.

It has a configurable host interface that supports I3C, I2C and SPI serial
  communication, features a 2kB FIFO and 2 programmable interrupts with
  ultra-low-power wake-on-motion support to minimize system power consumption.

Other industry-leading features include InvenSense on-chip APEX Motion
  Processing engine for gesture recognition, activity classification, and
  pedometer, along with programmable digital filters, and an embedded
  temperature sensor.

https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf

properties:
  compatible:
    enum:
      - invensense,icm42600
      - invensense,icm42602
      - invensense,icm42605
      - invensense,icm42622

reg:
    maxItems: 1

interrupts:
    maxItems: 1

drive-open-drain:
    type: boolean

vdd-supply:
    description: Regulator that provides power to the sensor

vddio-supply:
    description: Regulator that provides power to the bus

required:
  - compatible
  - reg
  - interrupts

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c0 {
        #address-cells = <1>;
        #size-cells = <0>;

icm42605@68 {
          compatible = "invensense,icm42605";
          reg = <0x68>;
          interrupt-parent = <&gpio2>;
          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
          vdd-supply = <&vdd>;
          vddio-supply = <&vddio>;
        };
    };
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    spi0 {
        #address-cells = <1>;
        #size-cells = <0>;

icm42602@0 {
          compatible = "invensense,icm42602";
          reg = <0>;
          spi-max-frequency = <24000000>;
          spi-cpha;
          spi-cpol;
          interrupt-parent = <&gpio1>;
          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
          vdd-supply = <&vdd>;
          vddio-supply = <&vddio>;
        };
    };

003 File Manager

Editing: invensense,icm42600.yaml

Upload File

Create Folder