File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/powerpc

usr / src / sys / contrib / device-tree / src / powerpc /

📁 ..
📄 a3m071.dts(2.4 KB)
📄 a4m072.dts(3.03 KB)
📄 ac14xx.dts(7.71 KB)
📄 acadia.dts(5.06 KB)
📄 adder875-redboot.dts(3.72 KB)
📄 adder875-uboot.dts(3.69 KB)
📄 akebono.dts(12.21 KB)
📄 amigaone.dts(3.87 KB)
📄 arches.dts(8.41 KB)
📄 asp834x-redboot.dts(6.52 KB)
📄 bamboo.dts(7.75 KB)
📄 bluestone.dts(9.66 KB)
📄 canyonlands.dts(15.39 KB)
📄 charon.dts(5.01 KB)
📄 cm5200.dts(1.31 KB)
📄 currituck.dts(7.28 KB)
📄 digsy_mtc.dts(2.84 KB)
📄 ebony.dts(8.22 KB)
📄 eiger.dts(10.5 KB)
📄 ep8248e.dts(4.36 KB)
📄 ep88xc.dts(4.4 KB)
📁 fsl
📄 fsp2.dts(12.79 KB)
📄 gamecube.dts(2.2 KB)
📄 glacier.dts(15.87 KB)
📄 haleakala.dts(7.41 KB)
📄 holly.dts(4.8 KB)
📄 hotfoot.dts(7 KB)
📄 icon.dts(12.33 KB)
📄 iss4xx-mpic.dts(3.75 KB)
📄 iss4xx.dts(2.79 KB)
📄 katmai.dts(14.24 KB)
📄 kilauea.dts(11.5 KB)
📄 klondike.dts(4.88 KB)
📄 kmeter1.dts(13.19 KB)
📄 ksi8560.dts(7.59 KB)
📄 kuroboxHD.dts(3.67 KB)
📄 kuroboxHG.dts(3.68 KB)
📄 lite5200.dts(6.53 KB)
📄 lite5200b.dts(3.11 KB)
📄 makalu.dts(9.8 KB)
📄 media5200.dts(3.15 KB)
📄 mgcoge.dts(5.76 KB)
📄 motionpro.dts(2.41 KB)
📄 mpc5121.dtsi(11.75 KB)
📄 mpc5121ads.dts(3.38 KB)
📄 mpc5125twr.dts(6.55 KB)
📄 mpc5200b.dtsi(7.14 KB)
📄 mpc7448hpc2.dts(4.19 KB)
📄 mpc8272ads.dts(6.2 KB)
📄 mpc8308_p1m.dts(6.94 KB)
📄 mpc8308rdb.dts(6.49 KB)
📄 mpc8313erdb.dts(9.09 KB)
📄 mpc8315erdb.dts(10.71 KB)
📄 mpc832x_mds.dts(10.5 KB)
📄 mpc832x_rdb.dts(8.51 KB)
📄 mpc8349emitx.dts(9.31 KB)
📄 mpc8349emitxgp.dts(5.49 KB)
📄 mpc834x_mds.dts(9.53 KB)
📄 mpc836x_mds.dts(11.38 KB)
📄 mpc836x_rdk.dts(10.35 KB)
📄 mpc8377_mds.dts(11.28 KB)
📄 mpc8377_rdb.dts(11.12 KB)
📄 mpc8377_wlan.dts(10.24 KB)
📄 mpc8378_mds.dts(10.91 KB)
📄 mpc8378_rdb.dts(10.75 KB)
📄 mpc8379_mds.dts(9.98 KB)
📄 mpc8379_rdb.dts(9.83 KB)
📄 mpc8610_hpcd.dts(11.01 KB)
📄 mpc866ads.dts(3.92 KB)
📄 mpc885ads.dts(5.09 KB)
📄 mucmc52.dts(4.58 KB)
📄 mvme5100.dts(4.35 KB)
📄 o2d.dts(783 B)
📄 o2d.dtsi(2.08 KB)
📄 o2d300.dts(932 B)
📄 o2dnt2.dts(796 B)
📄 o2i.dts(505 B)
📄 o2mnt.dts(517 B)
📄 o3dnt.dts(791 B)
📄 obs600.dts(7.85 KB)
📄 pcm030.dts(2.19 KB)
📄 pcm032.dts(3.64 KB)
📄 pdm360ng.dts(3.39 KB)
📄 pq2fads.dts(5.69 KB)
📄 ps3.dts(1.25 KB)
📄 rainier.dts(8.83 KB)
📄 redwood.dts(10.7 KB)
📄 sam440ep.dts(7.24 KB)
📄 sbc8548-altflash.dts(2.3 KB)
📄 sbc8548-post.dtsi(6.82 KB)
📄 sbc8548-pre.dtsi(903 B)
📄 sbc8548.dts(2.17 KB)
📄 sequoia.dts(10.42 KB)
📄 socrates.dts(7.3 KB)
📄 storcenter.dts(3.12 KB)
📄 stx_gp3_8560.dts(6.41 KB)
📄 stxssa8555.dts(8.66 KB)
📄 taishan.dts(10.58 KB)
📄 tqm5200.dts(4.47 KB)
📄 tqm8540.dts(7.23 KB)
📄 tqm8541.dts(6.9 KB)
📄 tqm8548-bigflash.dts(10.95 KB)
📄 tqm8548.dts(10.95 KB)
📄 tqm8555.dts(6.9 KB)
📄 tqm8560.dts(8.58 KB)
📄 tqm8xx.dts(4 KB)
📄 uc101.dts(2.55 KB)
📄 warp.dts(7.03 KB)
📄 wii.dts(5.56 KB)
📄 xcalibur1501.dts(15.41 KB)
📄 xpedite5200.dts(9.96 KB)
📄 xpedite5200_xmon.dts(10.97 KB)
📄 xpedite5301.dts(14.24 KB)
📄 xpedite5330.dts(15.53 KB)
📄 xpedite5370.dts(14.16 KB)
📄 yosemite.dts(8.22 KB)

Editing: mpc5125twr.dts

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * STx/Freescale ADS5125 MPC5125 silicon
 *
 * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
 *
 * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
 * Copyright (C) 2013 Sirius Electronic Systems
 */

#include <dt-bindings/clock/mpc512x-clock.h>

/dts-v1/;

/ {
	model = "mpc5125twr"; // In BSP "mpc5125ads"
	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
	#address-cells = <1>;
	#size-cells = <1>;
	interrupt-parent = <&ipic>;

aliases {
		gpio0 = &gpio0;
		gpio1 = &gpio1;
		ethernet0 = &eth0;
	};

cpus {
		#address-cells = <1>;
		#size-cells = <0>;

PowerPC,5125@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <0x20>;	// 32 bytes
			i-cache-line-size = <0x20>;	// 32 bytes
			d-cache-size = <0x8000>;	// L1, 32K
			i-cache-size = <0x8000>;	// L1, 32K
			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
			bus-frequency = <198000000>;	// 198 MHz csb bus
			clock-frequency = <396000000>;	// 396 MHz ppc core
		};
	};

memory {
		device_type = "memory";
		reg = <0x00000000 0x10000000>;	// 256MB at 0
	};

sram@30000000 {
		compatible = "fsl,mpc5121-sram";
		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
	};

clocks {
		#address-cells = <1>;
		#size-cells = <0>;

osc: osc {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <33000000>;
		};
	};

soc@80000000 {
		compatible = "fsl,mpc5121-immr";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x80000000 0x400000>;
		reg = <0x80000000 0x400000>;
		bus-frequency = <66000000>;	// 66 MHz ips bus

// IPIC
		// interrupts cell = <intr #, sense>
		// sense values match linux IORESOURCE_IRQ_* defines:
		// sense == 8: Level, low assertion
		// sense == 2: Edge, high-to-low change
		//
		ipic: interrupt-controller@c00 {
			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0xc00 0x100>;
		};

rtc@a00 {	// Real time clock
			compatible = "fsl,mpc5121-rtc";
			reg = <0xa00 0x100>;
			interrupts = <79 0x8 80 0x8>;
		};

reset@e00 {	// Reset module
			compatible = "fsl,mpc5125-reset";
			reg = <0xe00 0x100>;
		};

clks: clock@f00 {	// Clock control
			compatible = "fsl,mpc5121-clock";
			reg = <0xf00 0x100>;
			#clock-cells = <1>;
			clocks = <&osc>;
			clock-names = "osc";
		};

pmc@1000{  // Power Management Controller
			compatible = "fsl,mpc5121-pmc";
			reg = <0x1000 0x100>;
			interrupts = <83 0x2>;
		};

gpio0: gpio@1100 {
			compatible = "fsl,mpc5125-gpio";
			reg = <0x1100 0x080>;
			interrupts = <78 0x8>;
		};

gpio1: gpio@1180 {
			compatible = "fsl,mpc5125-gpio";
			reg = <0x1180 0x080>;
			interrupts = <86 0x8>;
		};

can@1300 { // CAN rev.2
			compatible = "fsl,mpc5121-mscan";
			interrupts = <12 0x8>;
			reg = <0x1300 0x80>;
			clocks = <&clks MPC512x_CLK_BDLC>,
				 <&clks MPC512x_CLK_IPS>,
				 <&clks MPC512x_CLK_SYS>,
				 <&clks MPC512x_CLK_REF>,
				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
			clock-names = "ipg", "ips", "sys", "ref", "mclk";
		};

can@1380 {
			compatible = "fsl,mpc5121-mscan";
			interrupts = <13 0x8>;
			reg = <0x1380 0x80>;
			clocks = <&clks MPC512x_CLK_BDLC>,
				 <&clks MPC512x_CLK_IPS>,
				 <&clks MPC512x_CLK_SYS>,
				 <&clks MPC512x_CLK_REF>,
				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
			clock-names = "ipg", "ips", "sys", "ref", "mclk";
		};

sdhc@1500 {
			compatible = "fsl,mpc5121-sdhc";
			interrupts = <8 0x8>;
			reg = <0x1500 0x100>;
			clocks = <&clks MPC512x_CLK_IPS>,
				 <&clks MPC512x_CLK_SDHC>;
			clock-names = "ipg", "per";
		};

i2c@1700 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
			reg = <0x1700 0x20>;
			interrupts = <0x9 0x8>;
			clocks = <&clks MPC512x_CLK_I2C>;
			clock-names = "ipg";
		};

i2c@1720 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
			reg = <0x1720 0x20>;
			interrupts = <0xa 0x8>;
			clocks = <&clks MPC512x_CLK_I2C>;
			clock-names = "ipg";
		};

i2c@1740 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
			reg = <0x1740 0x20>;
			interrupts = <0xb 0x8>;
			clocks = <&clks MPC512x_CLK_I2C>;
			clock-names = "ipg";
		};

i2ccontrol@1760 {
			compatible = "fsl,mpc5121-i2c-ctrl";
			reg = <0x1760 0x8>;
		};

diu@2100 {
			compatible = "fsl,mpc5121-diu";
			reg = <0x2100 0x100>;
			interrupts = <64 0x8>;
			clocks = <&clks MPC512x_CLK_DIU>;
			clock-names = "ipg";
		};

mdio@2800 {
			compatible = "fsl,mpc5121-fec-mdio";
			reg = <0x2800 0x800>;
			#address-cells = <1>;
			#size-cells = <0>;
			phy0: ethernet-phy@0 {
				reg = <1>;
			};
		};

eth0: ethernet@2800 {
			compatible = "fsl,mpc5125-fec";
			reg = <0x2800 0x800>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <4 0x8>;
			phy-handle = < &phy0 >;
			phy-connection-type = "rmii";
			clocks = <&clks MPC512x_CLK_FEC>;
			clock-names = "per";
		};

// IO control
		ioctl@a000 {
			compatible = "fsl,mpc5125-ioctl";
			reg = <0xA000 0x1000>;
		};

// disable USB1 port
		// TODO:
		// correct pinmux config and fix USB3320 ulpi dependency
		// before re-enabling it
		usb@3000 {
			compatible = "fsl,mpc5121-usb2-dr";
			reg = <0x3000 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <43 0x8>;
			dr_mode = "host";
			phy_type = "ulpi";
			clocks = <&clks MPC512x_CLK_USB1>;
			clock-names = "ipg";
			status = "disabled";
		};

sclpc@10100 {
			compatible = "fsl,mpc512x-lpbfifo";
			reg = <0x10100 0x50>;
			interrupts = <7 0x8>;
			dmas = <&dma0 26>;
			dma-names = "rx-tx";
		};

// 5125 PSCs are not 52xx or 5121 PSC compatible
		// PSC1 uart0 aka ttyPSC0
		serial@11100 {
			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
			reg = <0x11100 0x100>;
			interrupts = <40 0x8>;
			fsl,rx-fifo-size = <16>;
			fsl,tx-fifo-size = <16>;
			clocks = <&clks MPC512x_CLK_PSC1>,
				 <&clks MPC512x_CLK_PSC1_MCLK>;
			clock-names = "ipg", "mclk";
		};

// PSC9 uart1 aka ttyPSC1
		serial@11900 {
			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
			reg = <0x11900 0x100>;
			interrupts = <40 0x8>;
			fsl,rx-fifo-size = <16>;
			fsl,tx-fifo-size = <16>;
			clocks = <&clks MPC512x_CLK_PSC9>,
				 <&clks MPC512x_CLK_PSC9_MCLK>;
			clock-names = "ipg", "mclk";
		};

pscfifo@11f00 {
			compatible = "fsl,mpc5121-psc-fifo";
			reg = <0x11f00 0x100>;
			interrupts = <40 0x8>;
			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
			clock-names = "ipg";
		};

dma0: dma@14000 {
			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
			reg = <0x14000 0x1800>;
			interrupts = <65 0x8>;
			#dma-cells = <1>;
		};
	};
};

003 File Manager

Editing: mpc5125twr.dts

Upload File

Create Folder