File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/Bindings/ata

usr / src / sys / contrib / device-tree / Bindings / ata /

📁 ..
📄 ahci-ceva.txt(2.59 KB)
📄 ahci-da850.txt(645 B)
📄 ahci-dm816.txt(790 B)
📄 ahci-fsl-qoriq.txt(768 B)
📄 ahci-mtk.txt(2.01 KB)
📄 ahci-platform.txt(2.42 KB)
📄 ahci-st.txt(1.2 KB)
📄 allwinner,sun4i-a10-ahci.yaml(928 B)
📄 allwinner,sun8i-r40-ahci.yaml(1.35 KB)
📄 apm-xgene.txt(2.23 KB)
📄 atmel-at91_cf.txt(534 B)
📄 brcm,sata-brcm.txt(1.1 KB)
📄 cavium-compact-flash.txt(911 B)
📄 cortina,gemini-sata-bridge.txt(2.01 KB)
📄 exynos-sata.txt(945 B)
📄 faraday,ftide010.yaml(1.97 KB)
📄 fsl-sata.txt(897 B)
📄 imx-pata.txt(389 B)
📄 imx-sata.txt(1.34 KB)
📄 marvell.txt(567 B)
📄 nvidia,tegra124-ahci.txt(1.46 KB)
📄 pata-arasan.txt(988 B)
📄 pata-common.yaml(1.39 KB)
📄 qcom-sata.txt(1.42 KB)
📄 renesas,rcar-sata.yaml(1.8 KB)
📄 sata-common.yaml(1.35 KB)
📄 sata_highbank.yaml(2.47 KB)

Editing: nvidia,tegra124-ahci.txt

Tegra SoC SATA AHCI controller

Required properties :
- compatible : Must be one of:
  - Tegra124 : "nvidia,tegra124-ahci"
  - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
  - Tegra210 : "nvidia,tegra210-ahci"
- reg : Should contain 2 entries:
  - AHCI register set (SATA BAR5)
  - SATA register set
- interrupts : Defines the interrupt used by SATA
- clocks : Must contain an entry for each entry in clock-names.
  See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
  - sata
  - sata-oob
- resets : Must contain an entry for each entry in reset-names.
  See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
  - sata
  - sata-oob
  - sata-cold
- phys : Must contain an entry for each entry in phy-names.
  See ../phy/phy-bindings.txt for details.
- phy-names : Must include the following entries:
  - For Tegra124 and Tegra132:
    - sata-phy : XUSB PADCTL SATA PHY
- For Tegra124 and Tegra132:
  - hvdd-supply : Defines the SATA HVDD regulator
  - vddio-supply : Defines the SATA VDDIO regulator
  - avdd-supply : Defines the SATA AVDD regulator
  - target-5v-supply : Defines the SATA 5V power regulator
  - target-12v-supply : Defines the SATA 12V power regulator

Optional properties:
- reg :
  - AUX register set
- clock-names :
  - cml1 :
    cml1 clock should be defined here if the PHY driver
    doesn't manage them. If it does, they should not be.
- phy-names :
  - For T210:
    - sata-phy

003 File Manager

Editing: nvidia,tegra124-ahci.txt

Upload File

Create Folder