003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/hsi
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
hsi
/
📁
..
📄
client-devices.txt
(1.28 KB)
📄
nokia-modem.txt
(1.65 KB)
📄
omap-ssi.txt
(2.82 KB)
Editing: omap-ssi.txt
OMAP SSI controller bindings OMAP3's Synchronous Serial Interface (SSI) controller implements a legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), while the controller found inside OMAP4 is supposed to be fully compliant with the HSI standard. Required properties: - compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. - interrupt-names: Contains the value "gdd_mpu". - interrupts: Contains matching interrupt information for each entry in interrupt-names. - ranges: Represents the bus address mapping between the main controller node and the child nodes below. - clock-names: Must include the following entries: "ssi_ssr_fck": The OMAP clock of that name "ssi_sst_fck": The OMAP clock of that name "ssi_ick": The OMAP clock of that name - clocks: Contains a matching clock specifier for each entry in clock-names. - #address-cells: Should be set to <1> - #size-cells: Should be set to <1> Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. - interrupts: Should contain interrupt specifiers for mpu interrupts 0 and 1 (in this order). - ti,ssi-cawake-gpio: Defines which GPIO pin is used to signify CAWAKE events for the port. This is an optional board-specific property. If it's missing the port will not be enabled. Optional properties: - ti,hwmods: Shall contain TI interconnect module name if needed by the SoC Example for Nokia N900: ssi-controller@48058000 { compatible = "ti,omap3-ssi"; /* needed until hwmod is updated to use the compatible string */ ti,hwmods = "ssi"; reg = <0x48058000 0x1000>, <0x48059000 0x1000>; reg-names = "sys", "gdd"; interrupts = <55>; interrupt-names = "gdd_mpu"; clocks = <&ssi_ssr_fck>, <&ssi_sst_fck>, <&ssi_ick>; clock-names = "ssi_ssr_fck", "ssi_sst_fck", "ssi_ick"; #address-cells = <1>; #size-cells = <1>; ranges; ssi-port@4805a000 { compatible = "ti,omap3-ssi-port"; reg = <0x4805a000 0x800>, <0x4805a800 0x800>; reg-names = "tx", "rx"; interrupt-parent = <&intc>; interrupts = <67>, <68>; ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ } ssi-port@4805a000 { compatible = "ti,omap3-ssi-port"; reg = <0x4805b000 0x800>, <0x4805b800 0x800>; reg-names = "tx", "rx"; interrupt-parent = <&intc>; interrupts = <69>, <70>; } }
Upload File
Create Folder