File Manager

003 File Manager

Current Path: /usr/src/sys/dts/powerpc

📁 ..
📄 Makefile(77 B)
📄 mpc8555cds.dts(11.32 KB)
📄 mpc8572ds.dts(21.36 KB)
📄 p1020rdb.dts(14.66 KB)
📄 p2020ds.dts(17.23 KB)
📄 p2041rdb.dts(10.66 KB)
📄 p2041si.dtsi(31.65 KB)
📄 p3041ds.dts(13.09 KB)
📄 p3041si.dtsi(32.64 KB)
📄 p5020ds.dts(13 KB)
📄 p5020si.dtsi(33.87 KB)

Editing: p3041si.dtsi

/*
 * P3041 Silicon Device Tree Source
 *
 * Copyright 2010-2011 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/* $FreeBSD$ */

/dts-v1/;

/ {
	compatible = "fsl,P3041";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

aliases {
		ccsr = &soc;
		dcsr = &dcsr;

ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		ethernet4 = &enet4;
		ethernet5 = &enet5;
		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		pci3 = &pci3;
		usb0 = &usb0;
		usb1 = &usb1;
		dma0 = &dma0;
		dma1 = &dma1;
		bman = &bman;
		qman = &qman;
		pme = &pme;
		rman = &rman;
		sdhc = &sdhc;
		msi0 = &msi0;
		msi1 = &msi1;
		msi2 = &msi2;

crypto = &crypto;
		sec_jr0 = &sec_jr0;
		sec_jr1 = &sec_jr1;
		sec_jr2 = &sec_jr2;
		sec_jr3 = &sec_jr3;
		rtic_a = &rtic_a;
		rtic_b = &rtic_b;
		rtic_c = &rtic_c;
		rtic_d = &rtic_d;
		sec_mon = &sec_mon;

fman0 = &fman0;
		fman0_oh0 = &fman0_oh0;
		fman0_oh1 = &fman0_oh1;
		fman0_oh2 = &fman0_oh2;
		fman0_oh3 = &fman0_oh3;
		fman0_oh4 = &fman0_oh4;
		fman0_oh5 = &fman0_oh5;
		fman0_oh6 = &fman0_oh6;
		fman0_rx0 = &fman0_rx0;
		fman0_rx1 = &fman0_rx1;
		fman0_rx2 = &fman0_rx2;
		fman0_rx3 = &fman0_rx3;
		fman0_rx4 = &fman0_rx4;
		fman0_rx5 = &fman0_rx5;
	};

cpus {
		#address-cells = <1>;
		#size-cells = <0>;

cpu0: PowerPC,e500mc@0 {
			device_type = "cpu";
			reg = <0>;
			bus-frequency = <749999996>;
			next-level-cache = <&L2_0>;
			L2_0: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu1: PowerPC,e500mc@1 {
			device_type = "cpu";
			reg = <1>;
			next-level-cache = <&L2_1>;
			L2_1: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu2: PowerPC,e500mc@2 {
			device_type = "cpu";
			reg = <2>;
			next-level-cache = <&L2_2>;
			L2_2: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu3: PowerPC,e500mc@3 {
			device_type = "cpu";
			reg = <3>;
			next-level-cache = <&L2_3>;
			L2_3: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
	};

dcsr: dcsr@f00000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "fsl,dcsr", "simple-bus";

dcsr-epu@0 {
			compatible = "fsl,dcsr-epu";
			interrupts = <52 2 0 0
				      84 2 0 0
				      85 2 0 0>;
			interrupt-parent = <&mpic>;
			reg = <0x0 0x1000>;
		};
		dcsr-npc {
			compatible = "fsl,dcsr-npc";
			reg = <0x1000 0x1000 0x1000000 0x8000>;
		};
		dcsr-nxc@2000 {
			compatible = "fsl,dcsr-nxc";
			reg = <0x2000 0x1000>;
		};
		dcsr-corenet {
			compatible = "fsl,dcsr-corenet";
			reg = <0x8000 0x1000 0xB0000 0x1000>;
		};
		dcsr-dpaa@9000 {
			compatible = "fsl,p43041-dcsr-dpaa", "fsl,dcsr-dpaa";
			reg = <0x9000 0x1000>;
		};
		dcsr-ocn@11000 {
			compatible = "fsl,p43041-dcsr-ocn", "fsl,dcsr-ocn";
			reg = <0x11000 0x1000>;
		};
		dcsr-ddr@12000 {
			compatible = "fsl,dcsr-ddr";
			dev-handle = <&ddr>;
			reg = <0x12000 0x1000>;
		};
		dcsr-nal@18000 {
			compatible = "fsl,p43041-dcsr-nal", "fsl,dcsr-nal";
			reg = <0x18000 0x1000>;
		};
		dcsr-rcpm@22000 {
			compatible = "fsl,p43041-dcsr-rcpm", "fsl,dcsr-rcpm";
			reg = <0x22000 0x1000>;
		};
		dcsr-cpu-sb-proxy@40000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu0>;
			reg = <0x40000 0x1000>;
		};
		dcsr-cpu-sb-proxy@41000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu1>;
			reg = <0x41000 0x1000>;
		};
		dcsr-cpu-sb-proxy@42000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu2>;
			reg = <0x42000 0x1000>;
		};
		dcsr-cpu-sb-proxy@43000 {
			compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
			cpu-handle = <&cpu3>;
			reg = <0x43000 0x1000>;
		};
	};

bman-portals@ff4000000 {
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		compatible = "fsl,bman-portals";
		ranges = <0x0 0xf 0xfde00000 0x200000>;
		bman-portal@0 {
			cell-index = <0x0>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x0 0x4000 0x100000 0x1000>;
			interrupts = <105 2 0 0>;
		};
		bman-portal@4000 {
			cell-index = <0x1>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x4000 0x4000 0x101000 0x1000>;
			interrupts = <107 2 0 0>;
		};
		bman-portal@8000 {
			cell-index = <2>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x8000 0x4000 0x102000 0x1000>;
			interrupts = <109 2 0 0>;
		};
		bman-portal@c000 {
			cell-index = <0x3>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0xc000 0x4000 0x103000 0x1000>;
			interrupts = <111 2 0 0>;
		};
		bman-portal@10000 {
			cell-index = <0x4>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x10000 0x4000 0x104000 0x1000>;
			interrupts = <113 2 0 0>;
		};
		bman-portal@14000 {
			cell-index = <0x5>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x14000 0x4000 0x105000 0x1000>;
			interrupts = <115 2 0 0>;
		};
		bman-portal@18000 {
			cell-index = <0x6>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x18000 0x4000 0x106000 0x1000>;
			interrupts = <117 2 0 0>;
		};
		bman-portal@1c000 {
			cell-index = <0x7>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x1c000 0x4000 0x107000 0x1000>;
			interrupts = <119 2 0 0>;
		};
		bman-portal@20000 {
			cell-index = <0x8>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x20000 0x4000 0x108000 0x1000>;
			interrupts = <121 2 0 0>;
		};
		bman-portal@24000 {
			cell-index = <0x9>;
			compatible = "fsl,p3041-bman-portal", "fsl,bman-portal";
			reg = <0x24000 0x4000 0x109000 0x1000>;
			interrupts = <123 2 0 0>;
		};

buffer-pool@0 {
			compatible = "fsl,p3041-bpool", "fsl,bpool";
			fsl,bpid = <0>;
			fsl,bpool-cfg = <0 0x100 0 1 0 0x100>;
		};
	};

qman-portals@ff4200000 {
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		compatible = "fsl,qman-portals";
		ranges = <0x0 0xf 0xfdc00000 0x200000>;
		qportal0: qman-portal@0 {
			cell-index = <0x0>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x0 0x4000 0x100000 0x1000>;
			interrupts = <104 0x2 0 0>;
			fsl,qman-channel-id = <0x0>;
		};

qportal1: qman-portal@4000 {
			cell-index = <0x1>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x4000 0x4000 0x101000 0x1000>;
			interrupts = <106 0x2 0 0>;
			fsl,qman-channel-id = <0x1>;
		};

qportal2: qman-portal@8000 {
			cell-index = <0x2>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x8000 0x4000 0x102000 0x1000>;
			interrupts = <108 0x2 0 0>;
			fsl,qman-channel-id = <0x2>;
		};

qportal3: qman-portal@c000 {
			cell-index = <0x3>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0xc000 0x4000 0x103000 0x1000>;
			interrupts = <110 0x2 0 0>;
			fsl,qman-channel-id = <0x3>;
		};

qportal4: qman-portal@10000 {
			cell-index = <0x4>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x10000 0x4000 0x104000 0x1000>;
			interrupts = <112 0x2 0 0>;
			fsl,qman-channel-id = <0x4>;
		};

qportal5: qman-portal@14000 {
			cell-index = <0x5>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x14000 0x4000 0x105000 0x1000>;
			interrupts = <114 0x2 0 0>;
			fsl,qman-channel-id = <0x5>;
		};

qportal6: qman-portal@18000 {
			cell-index = <0x6>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x18000 0x4000 0x106000 0x1000>;
			interrupts = <116 0x2 0 0>;
			fsl,qman-channel-id = <0x6>;
		};

qportal7: qman-portal@1c000 {
			cell-index = <0x7>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x1c000 0x4000 0x107000 0x1000>;
			interrupts = <118 0x2 0 0>;
			fsl,qman-channel-id = <0x7>;
		};

qportal8: qman-portal@20000 {
			cell-index = <0x8>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x20000 0x4000 0x108000 0x1000>;
			interrupts = <120 0x2 0 0>;
			fsl,qman-channel-id = <0x8>;
		};

qportal9: qman-portal@24000 {
			cell-index = <0x9>;
			compatible = "fsl,p3041-qman-portal", "fsl,qman-portal";
			reg = <0x24000 0x4000 0x109000 0x1000>;
			interrupts = <122 0x2 0 0>;
			fsl,qman-channel-id = <0x9>;
		};

qpool1: qman-pool@1 {
			cell-index = <1>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x21>;
		};

qpool2: qman-pool@2 {
			cell-index = <2>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x22>;
		};

qpool3: qman-pool@3 {
			cell-index = <3>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x23>;
		};

qpool4: qman-pool@4 {
			cell-index = <4>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x24>;
		};

qpool5: qman-pool@5 {
			cell-index = <5>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x25>;
		};

qpool6: qman-pool@6 {
			cell-index = <6>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x26>;
		};

qpool7: qman-pool@7 {
			cell-index = <7>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x27>;
		};

qpool8: qman-pool@8 {
			cell-index = <8>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x28>;
		};

qpool9: qman-pool@9 {
			cell-index = <9>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x29>;
		};

qpool10: qman-pool@10 {
			cell-index = <10>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2a>;
		};

qpool11: qman-pool@11 {
			cell-index = <11>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2b>;
		};

qpool12: qman-pool@12 {
			cell-index = <12>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2c>;
		};

qpool13: qman-pool@13 {
			cell-index = <13>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2d>;
		};

qpool14: qman-pool@14 {
			cell-index = <14>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2e>;
		};

qpool15: qman-pool@15 {
			cell-index = <15>;
			compatible = "fsl,p3041-qman-pool-channel", "fsl,qman-pool-channel";
			fsl,qman-channel-id = <0x2f>;
		};
	};

soc: soc@ffe000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		compatible = "simple-bus";
		
		bus-frequency = <0>;	// Filled out by kernel.
		
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;

soc-sram-error {
			compatible = "fsl,soc-sram-error";
			interrupts = <16 2 1 29>;
		};

corenet-law@0 {
			compatible = "fsl,corenet-law";
			reg = <0x0 0x1000>;
			fsl,num-laws = <32>;
		};

ddr: memory-controller@8000 {
			compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
			reg = <0x8000 0x1000>;
			interrupts = <16 2 1 23>;
		};

cpc: l3-cache-controller@10000 {
			compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
			reg = <0x10000 0x1000>;
			interrupts = <16 2 1 27>;
		};

corenet-cf@18000 {
			compatible = "fsl,corenet-cf";
			reg = <0x18000 0x1000>;
			interrupts = <16 2 1 31>;
			fsl,ccf-num-csdids = <32>;
			fsl,ccf-num-snoopids = <32>;
		};

iommu@20000 {
			compatible = "fsl,pamu-v1.0", "fsl,pamu";
			reg = <0x20000 0x4000>;
			interrupts = <
				24 2 0 0
				16 2 1 30>;
		};

mpic: pic@40000 {
			clock-frequency = <0>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <4>;
			reg = <0x40000 0x40000>;
			compatible = "fsl,mpic", "chrp,open-pic";
			device_type = "open-pic";
		};

msi0: msi@41600 {
			compatible = "fsl,mpic-msi";
			reg = <0x41600 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe0 0 0 0
				0xe1 0 0 0
				0xe2 0 0 0
				0xe3 0 0 0
				0xe4 0 0 0
				0xe5 0 0 0
				0xe6 0 0 0
				0xe7 0 0 0>;
		};

msi1: msi@41800 {
			compatible = "fsl,mpic-msi";
			reg = <0x41800 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xe8 0 0 0
				0xe9 0 0 0
				0xea 0 0 0
				0xeb 0 0 0
				0xec 0 0 0
				0xed 0 0 0
				0xee 0 0 0
				0xef 0 0 0>;
		};

msi2: msi@41a00 {
			compatible = "fsl,mpic-msi";
			reg = <0x41a00 0x200>;
			msi-available-ranges = <0 0x100>;
			interrupts = <
				0xf0 0 0 0
				0xf1 0 0 0
				0xf2 0 0 0
				0xf3 0 0 0
				0xf4 0 0 0
				0xf5 0 0 0
				0xf6 0 0 0
				0xf7 0 0 0>;
		};

guts: global-utilities@e0000 {
			compatible = "fsl,qoriq-device-config-1.0";
			reg = <0xe0000 0xe00>;
			fsl,has-rstcr;
			#sleep-cells = <1>;
			fsl,liodn-bits = <12>;
		};

pins: global-utilities@e0e00 {
			compatible = "fsl,qoriq-pin-control-1.0";
			reg = <0xe0e00 0x200>;
			#sleep-cells = <2>;
		};

clockgen: global-utilities@e1000 {
			compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
			reg = <0xe1000 0x1000>;
			clock-frequency = <0>;
		};

rcpm: global-utilities@e2000 {
			compatible = "fsl,qoriq-rcpm-1.0";
			reg = <0xe2000 0x1000>;
			#sleep-cells = <1>;
		};

sfp: sfp@e8000 {
			compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
			reg	   = <0xe8000 0x1000>;
		};

serdes: serdes@ea000 {
			compatible = "fsl,p3041-serdes";
			reg	   = <0xea000 0x1000>;
		};

dma0: dma@100300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
			reg = <0x100300 0x4>;
			ranges = <0x0 0x100100 0x200>;
			cell-index = <0>;
			dma-channel@0 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupts = <28 2 0 0>;
			};
			dma-channel@80 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupts = <29 2 0 0>;
			};
			dma-channel@100 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupts = <30 2 0 0>;
			};
			dma-channel@180 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupts = <31 2 0 0>;
			};
		};

dma1: dma@101300 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,p3041-dma", "fsl,eloplus-dma";
			reg = <0x101300 0x4>;
			ranges = <0x0 0x101100 0x200>;
			cell-index = <1>;
			dma-channel@0 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x0 0x80>;
				cell-index = <0>;
				interrupts = <32 2 0 0>;
			};
			dma-channel@80 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x80 0x80>;
				cell-index = <1>;
				interrupts = <33 2 0 0>;
			};
			dma-channel@100 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x100 0x80>;
				cell-index = <2>;
				interrupts = <34 2 0 0>;
			};
			dma-channel@180 {
				compatible = "fsl,p3041-dma-channel",
						"fsl,eloplus-dma-channel";
				reg = <0x180 0x80>;
				cell-index = <3>;
				interrupts = <35 2 0 0>;
			};
		};

spi@110000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,p3041-espi", "fsl,mpc8536-espi";
			reg = <0x110000 0x1000>;
			interrupts = <53 0x2 0 0>;
			fsl,espi-num-chipselects = <4>;
		};

sdhc: sdhc@114000 {
			compatible = "fsl,p3041-esdhc", "fsl,esdhc";
			reg = <0x114000 0x1000>;
			interrupts = <48 2 0 0>;
			sdhci,auto-cmd12;
			clock-frequency = <0>;
		};

i2c@118000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x118000 0x100>;
			interrupts = <38 2 0 0>;
			dfsrr;
		};

i2c@118100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <1>;
			compatible = "fsl-i2c";
			reg = <0x118100 0x100>;
			interrupts = <38 2 0 0>;
			dfsrr;
		};

i2c@119000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <2>;
			compatible = "fsl-i2c";
			reg = <0x119000 0x100>;
			interrupts = <39 2 0 0>;
			dfsrr;
		};

i2c@119100 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <3>;
			compatible = "fsl-i2c";
			reg = <0x119100 0x100>;
			interrupts = <39 2 0 0>;
			dfsrr;
		};

serial0: serial@11c500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11c500 0x100>;
			clock-frequency = <0>;
			interrupts = <36 2 0 0>;
		};

serial1: serial@11c600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11c600 0x100>;
			clock-frequency = <0>;
			interrupts = <36 2 0 0>;
		};

serial2: serial@11d500 {
			cell-index = <2>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11d500 0x100>;
			clock-frequency = <0>;
			interrupts = <37 2 0 0>;
		};

serial3: serial@11d600 {
			cell-index = <3>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x11d600 0x100>;
			clock-frequency = <0>;
			interrupts = <37 2 0 0>;
		};

gpio0: gpio@130000 {
			compatible = "fsl,p3041-gpio", "fsl,qoriq-gpio";
			reg = <0x130000 0x1000>;
			interrupts = <55 2 0 0>;
			#gpio-cells = <2>;
			gpio-controller;
		};

rman: rman@1e0000 {
			compatible = "fsl,rman";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x1e0000 0x20000>;
			reg = <0x1e0000 0x20000>;
			interrupts = <16 2 1 11>; /* err_irq */
			fsl,qman-channels-id = <0x62 0x63>;

inbound-block@0 {
				compatible = "fsl,rman-inbound-block";
				reg = <0x0 0x800>;
			};
			global-cfg@b00 {
				compatible = "fsl,rman-global-cfg";
				reg = <0xb00 0x500>;
			};
			inbound-block@1000 {
				compatible = "fsl,rman-inbound-block";
				reg = <0x1000 0x800>;
			};
			inbound-block@2000 {
				compatible = "fsl,rman-inbound-block";
				reg = <0x2000 0x800>;
			};
			inbound-block@3000 {
				compatible = "fsl,rman-inbound-block";
				reg = <0x3000 0x800>;
			};
		};

usb0: usb@210000 {
			compatible = "fsl,p3041-usb2-mph",
					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
			reg = <0x210000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <44 0x2 0 0>;
			phy_type = "utmi";
			port0;
		};

usb1: usb@211000 {
			compatible = "fsl,p3041-usb2-dr",
					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
			reg = <0x211000 0x1000>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <45 0x2 0 0>;
			dr_mode = "host";
			phy_type = "utmi";
		};

sata@220000 {
			compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
			reg = <0x220000 0x1000>;
			interrupts = <68 0x2 0 0>;
		};

sata@221000 {
			compatible = "fsl,p3041-sata", "fsl,pq-sata-v2";
			reg = <0x221000 0x1000>;
			interrupts = <69 0x2 0 0>;
		};

crypto: crypto@300000 {
			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
			#address-cells = <1>;
			#size-cells = <1>;
			reg		 = <0x300000 0x10000>;
			ranges		 = <0 0x300000 0x10000>;
			interrupts	 = <92 2 0 0>;

sec_jr0: jr@1000 {
				compatible = "fsl,sec-v4.2-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg = <0x1000 0x1000>;
				interrupts = <88 2 0 0>;
			};

sec_jr1: jr@2000 {
				compatible = "fsl,sec-v4.2-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg = <0x2000 0x1000>;
				interrupts = <89 2 0 0>;
			};

sec_jr2: jr@3000 {
				compatible = "fsl,sec-v4.2-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg = <0x3000 0x1000>;
				interrupts = <90 2 0 0>;
			};

sec_jr3: jr@4000 {
				compatible = "fsl,sec-v4.2-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg = <0x4000 0x1000>;
				interrupts = <91 2 0 0>;
			};

rtic@6000 {
				compatible = "fsl,sec-v4.2-rtic",
					     "fsl,sec-v4.0-rtic";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x6000 0x100>;
				ranges = <0x0 0x6100 0xe00>;

rtic_a: rtic-a@0 {
					compatible = "fsl,sec-v4.2-rtic-memory",
						     "fsl,sec-v4.0-rtic-memory";
					reg = <0x00 0x20 0x100 0x80>;
				};

rtic_b: rtic-b@20 {
					compatible = "fsl,sec-v4.2-rtic-memory",
						     "fsl,sec-v4.0-rtic-memory";
					reg = <0x20 0x20 0x200 0x80>;
				};

rtic_c: rtic-c@40 {
					compatible = "fsl,sec-v4.2-rtic-memory",
						     "fsl,sec-v4.0-rtic-memory";
					reg = <0x40 0x20 0x300 0x80>;
				};

rtic_d: rtic-d@60 {
					compatible = "fsl,sec-v4.2-rtic-memory",
						     "fsl,sec-v4.0-rtic-memory";
					reg = <0x60 0x20 0x500 0x80>;
				};
			};
		};

sec_mon: sec_mon@314000 {
			compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
			reg = <0x314000 0x1000>;
			interrupts = <93 2 0 0>;
		};

pme: pme@316000 {
			compatible = "fsl,pme";
			reg = <0x316000 0x10000>;
			/* "fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */
			/* "fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */
			interrupts = <16 2 1 5>;
		};

qman: qman@318000 {
			compatible = "fsl,p3041-qman", "fsl,qman";
			reg = <0x318000 0x1000>;
			interrupts = <16 2 1 3>;
			/* Commented out, use default allocation */
			/* "fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */
			/* "fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */
		};

bman: bman@31a000 {
			compatible = "fsl,p3041-bman", "fsl,bman";
			reg = <0x31a000 0x1000>;
			interrupts = <16 2 1 2>;
			/* Same as "fsl,qman-*, use default allocation */
			/* "fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */
		};

fman0: fman@400000 {
			#address-cells = <1>;
			#size-cells = <1>;
			cell-index = <0>;
			compatible = "fsl,p3041-fman", "fsl,fman", "simple-bus";
			ranges = <0 0x400000 0x100000>;
			reg = <0x400000 0x100000>;
			clock-frequency = <0>;
			interrupts = <
				96 2 0 0
				16 2 1 1>;

cc@0 {
				compatible = "fsl,p3041-fman-cc", "fsl,fman-cc";
			};

parser@c7000 {
				compatible = "fsl,p3041-fman-parser", "fsl,fman-parser";
				reg = <0xc7000 0x1000>;
			};

keygen@c1000 {
				compatible = "fsl,p3041-fman-keygen", "fsl,fman-keygen";
				reg = <0xc1000 0x1000>;
			};

policer@c0000 {
				compatible = "fsl,p3041-fman-policer", "fsl,fman-policer";
				reg = <0xc0000 0x1000>;
			};

muram@0 {
				compatible = "fsl,p3041-fman-muram", "fsl,fman-muram";
				reg = <0x0 0x28000>;
			};

bmi@80000 {
				compatible = "fsl,p3041-fman-bmi", "fsl,fman-bmi";
				reg = <0x80000 0x400>;
			};

qmi@80400 {
				compatible = "fsl,p3041-fman-qmi", "fsl,fman-qmi";
				reg = <0x80400 0x400>;
			};

fman0_rx0: port@88000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
				reg = <0x88000 0x1000>;
			};
			fman0_rx1: port@89000 {
				cell-index = <1>;
				compatible = "fsl,p3041-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
				reg = <0x89000 0x1000>;
			};
			fman0_rx2: port@8a000 {
				cell-index = <2>;
				compatible = "fsl,p3041-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
				reg = <0x8a000 0x1000>;
			};
			fman0_rx3: port@8b000 {
				cell-index = <3>;
				compatible = "fsl,p3041-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
				reg = <0x8b000 0x1000>;
			};
			fman0_rx4: port@8c000 {
				cell-index = <4>;
				compatible = "fsl,p3041-fman-port-1g-rx", "fsl,fman-port-1g-rx", "fsl,fman-v2-port-rx";
				reg = <0x8c000 0x1000>;
			};
			fman0_rx5: port@90000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-port-10g-rx", "fsl,fman-port-10g-rx";
				reg = <0x90000 0x1000>;
			};

fman0_tx5: port@b0000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-port-10g-tx", "fsl,fman-port-10g-tx";
				reg = <0xb0000 0x1000>;
				fsl,qman-channel-id = <0x40>;
			};
			fman0_tx0: port@a8000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
				reg = <0xa8000 0x1000>;
				fsl,qman-channel-id = <0x41>;
			};
			fman0_tx1: port@a9000 {
				cell-index = <1>;
				compatible = "fsl,p3041-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
				reg = <0xa9000 0x1000>;
				fsl,qman-channel-id = <0x42>;
			};
			fman0_tx2: port@aa000 {
				cell-index = <2>;
				compatible = "fsl,p3041-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
				reg = <0xaa000 0x1000>;
				fsl,qman-channel-id = <0x43>;
			};
			fman0_tx3: port@ab000 {
				cell-index = <3>;
				compatible = "fsl,p3041-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
				reg = <0xab000 0x1000>;
				fsl,qman-channel-id = <0x44>;
			};
			fman0_tx4: port@ac000 {
				cell-index = <4>;
				compatible = "fsl,p3041-fman-port-1g-tx", "fsl,fman-port-1g-tx", "fsl,fman-v2-port-tx";
				reg = <0xac000 0x1000>;
				fsl,qman-channel-id = <0x45>;
			};

fman0_oh0: port@81000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x81000 0x1000>;
				fsl,qman-channel-id = <0x46>;
			};
			fman0_oh1: port@82000 {
				cell-index = <1>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x82000 0x1000>;
				fsl,qman-channel-id = <0x47>;
			};
			fman0_oh2: port@83000 {
				cell-index = <2>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x83000 0x1000>;
				fsl,qman-channel-id = <0x48>;
			};
			fman0_oh3: port@84000 {
				cell-index = <3>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x84000 0x1000>;
				fsl,qman-channel-id = <0x49>;
			};
			fman0_oh4: port@85000 {
				cell-index = <4>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x85000 0x1000>;
				fsl,qman-channel-id = <0x4a>;
			};
			fman0_oh5: port@86000 {
				cell-index = <5>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x86000 0x1000>;
				fsl,qman-channel-id = <0x4b>;
			};
			fman0_oh6: port@87000 {
				cell-index = <6>;
				compatible = "fsl,p3041-fman-port-oh", "fsl,fman-port-oh";
				reg = <0x87000 0x1000>;
			};

enet0: ethernet@e0000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-1g-mac",
					"fsl,fman-1g-mac", "fsl,fman-dtsec";
				reg = <0xe0000 0x1000>;
				fsl,port-handles = <&fman0_rx0 &fman0_tx0>;
				ptimer-handle = <&ptp_timer0>;
			};

mdio0: mdio@e1120 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-mdio";
				reg = <0xe1120 0xee0>;
				interrupts = <100 1 0 0>;
			};

enet1: ethernet@e2000 {
				cell-index = <1>;
				compatible = "fsl,p3041-fman-1g-mac",
					"fsl,fman-1g-mac", "fsl,fman-dtsec";
				reg = <0xe2000 0x1000>;
				fsl,port-handles = <&fman0_rx1 &fman0_tx1>;
				ptimer-handle = <&ptp_timer0>;
			};

mdio@e3120 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-tbi";
				reg = <0xe3120 0xee0>;
				interrupts = <100 1 0 0>;
			};

enet2: ethernet@e4000 {
				cell-index = <2>;
				compatible = "fsl,p3041-fman-1g-mac",
				       "fsl,fman-1g-mac", "fsl,fman-dtsec";
				reg = <0xe4000 0x1000>;
				fsl,port-handles = <&fman0_rx2 &fman0_tx2>;
				ptimer-handle = <&ptp_timer0>;
			};

mdio@e5120 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-tbi";
				reg = <0xe5120 0xee0>;
				interrupts = <100 1 0 0>;
			};

enet3: ethernet@e6000 {
				cell-index = <3>;
				compatible = "fsl,p3041-fman-1g-mac",
					"fsl,fman-1g-mac", "fsl,fman-dtsec";
				reg = <0xe6000 0x1000>;
				fsl,port-handles = <&fman0_rx3 &fman0_tx3>;
			};

mdio@e7120 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-tbi";
				reg = <0xe7120 0xee0>;
				interrupts = <100 1 0 0>;
			};

enet4: ethernet@e8000 {
				cell-index = <4>;
				compatible = "fsl,p3041-fman-1g-mac",
					"fsl,fman-1g-mac", "fsl,fman-dtsec";
				reg = <0xe8000 0x1000>;
				fsl,port-handles = <&fman0_rx4 &fman0_tx4>;
				ptimer-handle = <&ptp_timer0>;
			};

mdio@e9120 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-tbi";
				reg = <0xe9120 0xee0>;
				interrupts = <100 1 0 0>;
			};

enet5: ethernet@f0000 {
				cell-index = <0>;
				compatible = "fsl,p3041-fman-10g-mac",
					"fsl,fman-10g-mac", "fsl,fman-xgec";
				reg = <0xf0000 0x1000>;
				fsl,port-handles = <&fman0_rx5 &fman0_tx5>;
			};

mdio@f1000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,fman-xmdio";
				reg = <0xf1000 0x1000>;
				interrupts = <100 1 0 0>;
			};

ptp_timer0: rtc@fe000 {
				compatible = "fsl,fman-rtc";
				reg = <0xfe000 0x1000>;
			};
		};
	};

rapidio@ffe0c0000 {
		compatible = "fsl,srio";
		interrupts = <16 2 1 11>;
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

port1 {
			#address-cells = <2>;
			#size-cells = <2>;
			cell-index = <1>;
		};

port2 {
			#address-cells = <2>;
			#size-cells = <2>;
			cell-index = <2>;
		};
	};

localbus@ffe124000 {
		compatible = "fsl,p3041-rev1.0-elbc", "simple-bus", "fsl,elbc";
		interrupts = <
			25 2 0 0
			16 2 1 19
			>;
		#address-cells = <2>;
		#size-cells = <1>;
	};

pci0: pcie@ffe200000 {
		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		status = "okay";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0x0 0xff>;
		clock-frequency = <0x1fca055>;
		fsl,msi = <&msi0>;
		interrupts = <16 2 1 15>;

pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 15>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 40 1 0 0
				0000 0 0 2 &mpic 1 1 0 0
				0000 0 0 3 &mpic 2 1 0 0
				0000 0 0 4 &mpic 3 1 0 0
				>;
		};
	};

pci1: pcie@ffe201000 {
		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		status = "disabled";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0 0xff>;
		clock-frequency = <0x1fca055>;
		fsl,msi = <&msi1>;
		interrupts = <16 2 1 14>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 14>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 41 1 0 0
				0000 0 0 2 &mpic 5 1 0 0
				0000 0 0 3 &mpic 6 1 0 0
				0000 0 0 4 &mpic 7 1 0 0
				>;
		};
	};

pci2: pcie@ffe202000 {
		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		status = "okay";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0x0 0xff>;
		clock-frequency = <0x1fca055>;
		fsl,msi = <&msi2>;
		interrupts = <16 2 1 13>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 13>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 42 1 0 0
				0000 0 0 2 &mpic 9 1 0 0
				0000 0 0 3 &mpic 10 1 0 0
				0000 0 0 4 &mpic 11 1 0 0
				>;
		};
	};

pci3: pcie@ffe203000 {
		compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
		device_type = "pci";
		status = "disabled";
		#size-cells = <2>;
		#address-cells = <3>;
		bus-range = <0x0 0xff>;
		clock-frequency = <0x1fca055>;
		fsl,msi = <&msi2>;
		interrupts = <16 2 1 12>;
		pcie@0 {
			reg = <0 0 0 0 0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			device_type = "pci";
			interrupts = <16 2 1 12>;
			interrupt-map-mask = <0xf800 0 0 7>;
			interrupt-map = <
				/* IDSEL 0x0 */
				0000 0 0 1 &mpic 43 1 0 0
				0000 0 0 2 &mpic 0 1 0 0
				0000 0 0 3 &mpic 4 1 0 0
				0000 0 0 4 &mpic 8 1 0 0
				>;
		};
	};
};

003 File Manager

Editing: p3041si.dtsi

Upload File

Create Folder