File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/arm64/rockchip

usr / src / sys / contrib / device-tree / src / arm64 / rockchip /

📁 ..
📄 px30-evb.dts(10.75 KB)
📄 px30.dtsi(53.88 KB)
📄 rk3308-evb.dts(4.62 KB)
📄 rk3308-roc-cc.dts(3.63 KB)
📄 rk3308.dtsi(38.04 KB)
📄 rk3326-odroid-go2.dts(11.47 KB)
📄 rk3326.dtsi(285 B)
📄 rk3328-a1.dts(6.74 KB)
📄 rk3328-evb.dts(5.4 KB)
📄 rk3328-roc-cc.dts(6.96 KB)
📄 rk3328-rock64.dts(7.46 KB)
📄 rk3328.dtsi(45.94 KB)
📄 rk3368-evb-act8846.dts(3.1 KB)
📄 rk3368-evb.dtsi(5.15 KB)
📄 rk3368-geekbox.dts(5.55 KB)
📄 rk3368-lion-haikou.dts(2.71 KB)
📄 rk3368-lion.dtsi(5.72 KB)
📄 rk3368-orion-r68-meta.dts(7.06 KB)
📄 rk3368-px5-evb.dts(5.49 KB)
📄 rk3368-r88.dts(6.69 KB)
📄 rk3368.dtsi(29.79 KB)
📄 rk3399-evb.dts(10.03 KB)
📄 rk3399-ficus.dts(3.22 KB)
📄 rk3399-firefly.dts(16.14 KB)
📄 rk3399-gru-bob.dts(1.71 KB)
📄 rk3399-gru-chromebook.dtsi(8.09 KB)
📄 rk3399-gru-kevin.dts(7.25 KB)
📄 rk3399-gru-scarlet-inx.dts(1.1 KB)
📄 rk3399-gru-scarlet-kd.dts(1.14 KB)
📄 rk3399-gru-scarlet.dtsi(12.54 KB)
📄 rk3399-gru.dtsi(17.21 KB)
📄 rk3399-hugsun-x99.dts(14.81 KB)
📄 rk3399-khadas-edge-captain.dts(441 B)
📄 rk3399-khadas-edge-v.dts(429 B)
📄 rk3399-khadas-edge.dts(266 B)
📄 rk3399-khadas-edge.dtsi(15.22 KB)
📄 rk3399-leez-p710.dts(12.47 KB)
📄 rk3399-nanopc-t4.dts(2.46 KB)
📄 rk3399-nanopi-m4.dts(1.25 KB)
📄 rk3399-nanopi-neo4.dts(934 B)
📄 rk3399-nanopi4.dtsi(14.55 KB)
📄 rk3399-op1-opp.dtsi(2.5 KB)
📄 rk3399-opp.dtsi(2.34 KB)
📄 rk3399-orangepi.dts(16.3 KB)
📄 rk3399-pinebook-pro.dts(22.45 KB)
📄 rk3399-puma-haikou.dts(4.74 KB)
📄 rk3399-puma.dtsi(10.59 KB)
📄 rk3399-roc-pc-mezzanine.dts(2.04 KB)
📄 rk3399-roc-pc.dts(261 B)
📄 rk3399-roc-pc.dtsi(16.06 KB)
📄 rk3399-rock-pi-4.dts(14.52 KB)
📄 rk3399-rock960.dts(3.18 KB)
📄 rk3399-rock960.dtsi(12.75 KB)
📄 rk3399-rockpro64-v2.dts(658 B)
📄 rk3399-rockpro64.dts(658 B)
📄 rk3399-rockpro64.dtsi(16.03 KB)
📄 rk3399-sapphire-excavator.dts(5.07 KB)
📄 rk3399-sapphire.dts(259 B)
📄 rk3399-sapphire.dtsi(12.35 KB)
📄 rk3399.dtsi(64.02 KB)
📄 rk3399pro-rock-pi-n10.dts(524 B)
📄 rk3399pro-vmarc-som.dtsi(9.16 KB)
📄 rk3399pro.dtsi(487 B)

Editing: rk3368-geekbox.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2016 Andreas Färber
 */

/dts-v1/;
#include "rk3368.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "GeekBox";
	compatible = "geekbuying,geekbox", "rockchip,rk3368";

chosen {
		stdout-path = "serial2:115200n8";
	};

memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};

ext_gmac: gmac-clk {
		compatible = "fixed-clock";
		clock-frequency = <125000000>;
		clock-output-names = "ext_gmac";
		#clock-cells = <0>;
	};

ir: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&ir_int>;
	};

keys: gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pwr_key>;

power {
			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
			label = "GPIO Power";
			linux,code = <KEY_POWER>;
			wakeup-source;
		};
	};

leds: gpio-leds {
		compatible = "gpio-leds";

blue_led: led-0 {
			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
			label = "geekbox:blue:led";
			default-state = "on";
		};

red_led: led-1 {
			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
			label = "geekbox:red:led";
			default-state = "off";
		};
	};

vcc_sys: vcc-sys-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};
};

&emmc {
	status = "okay";
	bus-width = <8>;
	cap-mmc-highspeed;
	clock-frequency = <150000000>;
	non-removable;
	vmmc-supply = <&vcc_io>;
	vqmmc-supply = <&vcc18_flash>;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
};

&gmac {
	status = "okay";
	phy-supply = <&vcc_lan>;
	phy-mode = "rgmii";
	clock_in_out = "input";
	assigned-clocks = <&cru SCLK_MAC>;
	assigned-clock-parents = <&ext_gmac>;
	pinctrl-names = "default";
	pinctrl-0 = <&rgmii_pins>;
	tx_delay = <0x30>;
	rx_delay = <0x10>;
};

&i2c0 {
	status = "okay";

rk808: pmic@1b {
		compatible = "rockchip,rk808";
		reg = <0x1b>;
		pinctrl-names = "default";
		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
		rockchip,system-power-controller;
		vcc1-supply = <&vcc_sys>;
		vcc2-supply = <&vcc_sys>;
		vcc3-supply = <&vcc_sys>;
		vcc4-supply = <&vcc_sys>;
		vcc6-supply = <&vcc_sys>;
		vcc7-supply = <&vcc_sys>;
		vcc8-supply = <&vcc_io>;
		vcc9-supply = <&vcc_sys>;
		vcc10-supply = <&vcc_sys>;
		vcc11-supply = <&vcc_sys>;
		vcc12-supply = <&vcc_io>;
		clock-output-names = "xin32k", "rk808-clkout2";
		#clock-cells = <1>;

regulators {
			vdd_cpu: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1500000>;
				regulator-name = "vdd_cpu";
			};

vdd_log: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1500000>;
				regulator-name = "vdd_log";
			};

vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_ddr";
			};

vcc_io: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc_io";
			};

vcc18_flash: LDO_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc18_flash";
			};

vcc33_lcd: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc33_lcd";
			};

vdd_10: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd_10";
			};

vcca_18: LDO_REG4 {
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca_18";
			};

vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
			};

vdd10_lcd: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1000000>;
				regulator-name = "vdd10_lcd";
			};

vcc_18: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_18";
			};

vcc18_lcd: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc18_lcd";
			};

vcc_sd: SWITCH_REG1 {
				regulator-name = "vcc_sd";
			};

vcc_lan: SWITCH_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_lan";
			};
		};
	};
};

&pinctrl {
	ir {
		ir_int: ir-int {
			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

keys {
		pwr_key: pwr-key {
			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

pmic {
		pmic_sleep: pmic-sleep {
			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
		};

pmic_int: pmic-int {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&tsadc {
	status = "okay";
	rockchip,hw-tshut-mode = <0>; /* CRU */
	rockchip,hw-tshut-polarity = <1>; /* high */
};

&uart2 {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_otg {
	status = "okay";
};

&wdt {
	status = "okay";
};

003 File Manager

Editing: rk3368-geekbox.dts

Upload File

Create Folder