File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/arm64/allwinner

usr / src / sys / contrib / device-tree / src / arm64 / allwinner /

📁 ..
📄 axp803.dtsi(2.73 KB)
📄 sun50i-a64-amarula-relic.dts(6.25 KB)
📄 sun50i-a64-bananapi-m64.dts(6.75 KB)
📄 sun50i-a64-cpu-opp.dtsi(1.51 KB)
📄 sun50i-a64-nanopi-a64.dts(4.4 KB)
📄 sun50i-a64-oceanic-5205-5inmfd.dts(1.55 KB)
📄 sun50i-a64-olinuxino-emmc.dts(555 B)
📄 sun50i-a64-olinuxino.dts(6.26 KB)
📄 sun50i-a64-orangepi-win.dts(7.58 KB)
📄 sun50i-a64-pine64-lts.dts(242 B)
📄 sun50i-a64-pine64-plus.dts(694 B)
📄 sun50i-a64-pine64.dts(5.27 KB)
📄 sun50i-a64-pinebook.dts(7.71 KB)
📄 sun50i-a64-pinephone-1.0.dts(272 B)
📄 sun50i-a64-pinephone-1.1.dts(854 B)
📄 sun50i-a64-pinephone-1.2.dts(1.03 KB)
📄 sun50i-a64-pinephone.dtsi(8.13 KB)
📄 sun50i-a64-pinetab.dts(8.7 KB)
📄 sun50i-a64-sopine-baseboard.dts(3.36 KB)
📄 sun50i-a64-sopine.dtsi(2.56 KB)
📄 sun50i-a64-teres-i.dts(7.13 KB)
📄 sun50i-a64.dtsi(31.99 KB)
📄 sun50i-h5-bananapi-m2-plus-v1.2.dts(332 B)
📄 sun50i-h5-bananapi-m2-plus.dts(283 B)
📄 sun50i-h5-cpu-opp.dtsi(1.78 KB)
📄 sun50i-h5-emlid-neutis-n5-devboard.dts(1.22 KB)
📄 sun50i-h5-emlid-neutis-n5.dtsi(254 B)
📄 sun50i-h5-libretech-all-h3-cc.dts(395 B)
📄 sun50i-h5-libretech-all-h3-it.dts(297 B)
📄 sun50i-h5-libretech-all-h5-cc.dts(1.22 KB)
📄 sun50i-h5-nanopi-neo-plus2.dts(2.95 KB)
📄 sun50i-h5-nanopi-neo2.dts(2.14 KB)
📄 sun50i-h5-orangepi-pc2.dts(3.68 KB)
📄 sun50i-h5-orangepi-prime.dts(3.43 KB)
📄 sun50i-h5-orangepi-zero-plus.dts(2.49 KB)
📄 sun50i-h5-orangepi-zero-plus2.dts(2.44 KB)
📄 sun50i-h5.dtsi(6.11 KB)
📄 sun50i-h6-beelink-gs1.dts(5.74 KB)
📄 sun50i-h6-cpu-opp.dtsi(3.14 KB)
📄 sun50i-h6-orangepi-3.dts(6.67 KB)
📄 sun50i-h6-orangepi-lite2.dts(1.64 KB)
📄 sun50i-h6-orangepi-one-plus.dts(967 B)
📄 sun50i-h6-orangepi.dtsi(5.07 KB)
📄 sun50i-h6-pine-h64-model-b.dts(373 B)
📄 sun50i-h6-pine-h64.dts(6.34 KB)
📄 sun50i-h6-tanix-tx6.dts(1.76 KB)
📄 sun50i-h6.dtsi(25.06 KB)

Editing: sun50i-a64-teres-i.dts

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
// Copyright (C) Harald Geyer <harald@ccbib.org>
// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>

/dts-v1/;

#include "sun50i-a64.dtsi"
#include "sun50i-a64-cpu-opp.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pwm/pwm.h>

/ {
	model = "Olimex A64 Teres-I";
	compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";

aliases {
		serial0 = &uart0;
	};

backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm 0 50000 0>;
		power-supply = <&reg_dcdc1>;
		brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
		default-brightness-level = <5>;
		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
	};

chosen {
		stdout-path = "serial0:115200n8";

framebuffer-lcd {
			eDP25-supply = <&reg_dldo2>;
			eDP12-supply = <&reg_dldo3>;
		};
	};

gpio-keys {
		compatible = "gpio-keys";

lid-switch {
			label = "Lid Switch";
			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
			linux,input-type = <EV_SW>;
			linux,code = <SW_LID>;
			wakeup-source;
		};
	};

leds {
		compatible = "gpio-leds";

capslock {
			label = "teres-i:green:capslock";
			gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
		};

numlock {
			label = "teres-i:green:numlock";
			gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
		};
	};

reg_usb1_vbus: usb1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "usb1-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
		status = "okay";
	};

wifi_pwrseq: wifi_pwrseq {
		compatible = "mmc-pwrseq-simple";
		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
	};

speaker_amp: audio-amplifier {
		compatible = "simple-audio-amplifier";
		enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
		sound-name-prefix = "Speaker Amp";
	};
};

&codec {
	status = "okay";
};

&codec_analog {
	cpvdd-supply = <&reg_eldo1>;
	status = "okay";
};

&dai {
	status = "okay";
};

&de {
	status = "okay";
};

&cpu0 {
	cpu-supply = <&reg_dcdc2>;
};

&cpu1 {
	cpu-supply = <&reg_dcdc2>;
};

&cpu2 {
	cpu-supply = <&reg_dcdc2>;
};

&cpu3 {
	cpu-supply = <&reg_dcdc2>;
};

&ehci1 {
	status = "okay";
};

&i2c0 {
	clock-frequency = <100000>;
	status = "okay";

anx6345: anx6345@38 {
		compatible = "analogix,anx6345";
		reg = <0x38>;
		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
		dvdd25-supply = <&reg_dldo2>;
		dvdd12-supply = <&reg_dldo3>;

ports {
			#address-cells = <1>;
			#size-cells = <0>;

port@0 {
				anx6345_in: endpoint {
					remote-endpoint = <&tcon0_out_anx6345>;
				};
			};
		};
	};
};

&mixer0 {
	status = "okay";
};

&mmc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc0_pins>;
	vmmc-supply = <&reg_dcdc1>;
	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
	disable-wp;
	bus-width = <4>;
	status = "okay";
};

&mmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc1_pins>;
	vmmc-supply = <&reg_aldo2>;
	vqmmc-supply = <&reg_dldo4>;
	mmc-pwrseq = <&wifi_pwrseq>;
	bus-width = <4>;
	non-removable;
	status = "okay";

rtl8723bs: wifi@1 {
		reg = <1>;
		interrupt-parent = <&r_pio>;
		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
		interrupt-names = "host-wake";
	};
};

&mmc2 {
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins>;
	vmmc-supply = <&reg_dcdc1>;
	vqmmc-supply = <&reg_dcdc1>;
	bus-width = <8>;
	non-removable;
	cap-mmc-hw-reset;
	status = "okay";
};

&ohci1 {
	status = "okay";
};

&pwm {
	status = "okay";
};

&r_rsb {
	status = "okay";

axp803: pmic@3a3 {
		compatible = "x-powers,axp803";
		reg = <0x3a3>;
		interrupt-parent = <&r_intc>;
		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
		wakeup-source;
	};
};

#include "axp803.dtsi"

&ac_power_supply {
	status = "okay";
};

&battery_power_supply {
	status = "okay";
};

&reg_aldo1 {
	regulator-always-on;
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-name = "vcc-pe";
};

&reg_aldo2 {
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-pl";
};

&reg_aldo3 {
	regulator-always-on;
	regulator-min-microvolt = <3000000>;
	regulator-max-microvolt = <3000000>;
	regulator-name = "vcc-pll-avcc";
};

&reg_dcdc1 {
	regulator-always-on;
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-3v3";
};

&reg_dcdc2 {
	regulator-always-on;
	regulator-min-microvolt = <1040000>;
	regulator-max-microvolt = <1300000>;
	regulator-name = "vdd-cpux";
};

/* DCDC3 is polyphased with DCDC2 */

&reg_dcdc5 {
	regulator-always-on;
	regulator-min-microvolt = <1500000>;
	regulator-max-microvolt = <1500000>;
	regulator-name = "vcc-ddr3";
};

&reg_dcdc6 {
	regulator-always-on;
	regulator-min-microvolt = <1100000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-sys";
};

&reg_dldo1 {
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-hdmi";
};

&reg_dldo2 {
	regulator-min-microvolt = <2500000>;
	regulator-max-microvolt = <2500000>;
	regulator-name = "vcc-pd";
};

&reg_dldo3 {
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "vdd-edp";
};

&reg_dldo4 {
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	regulator-name = "vcc-wifi-io";
};

&reg_eldo1 {
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "cpvdd";
};

&reg_eldo2 {
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	regulator-name = "vcc-dvdd-csi";
};

&reg_fldo1 {
	regulator-min-microvolt = <1200000>;
	regulator-max-microvolt = <1200000>;
	regulator-name = "vcc-1v2-hsic";
};

/*
 * The A64 chip cannot work with this regulator off, although
 * it seems to be only driving the AR100 core.
 * Maybe we don't still know well about CPUs domain.
 */
&reg_fldo2 {
	regulator-always-on;
	regulator-min-microvolt = <1100000>;
	regulator-max-microvolt = <1100000>;
	regulator-name = "vdd-cpus";
};

&reg_rtc_ldo {
	regulator-name = "vcc-rtc";
};

&simplefb_hdmi {
	vcc-hdmi-supply = <&reg_dldo1>;
};

&sound {
	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
	simple-audio-card,widgets = "Headphone", "Headphone Jack",
				    "Microphone", "Headset Microphone",
				    "Microphone", "Internal Microphone",
				    "Speaker", "Internal Speaker";
	simple-audio-card,routing =
			"Left DAC", "AIF1 Slot 0 Left",
			"Right DAC", "AIF1 Slot 0 Right",
			"AIF1 Slot 0 Left ADC", "Left ADC",
			"AIF1 Slot 0 Right ADC", "Right ADC",
			"Headphone Jack", "HP",
			"Speaker Amp INL", "LINEOUT",
			"Speaker Amp INR", "LINEOUT",
			"Internal Speaker", "Speaker Amp OUTL",
			"Internal Speaker", "Speaker Amp OUTR",
			"Internal Microphone", "MBIAS",
			"MIC1", "Internal Microphone",
			"Headset Microphone", "HBIAS",
			"MIC2", "Headset Microphone";
	status = "okay";
};

&tcon0 {
	pinctrl-names = "default";
	pinctrl-0 = <&lcd_rgb666_pins>;

status = "okay";
};

&tcon0_out {
	tcon0_out_anx6345: endpoint@0 {
		reg = <0>;
		remote-endpoint = <&anx6345_in>;
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pb_pins>;
	status = "okay";
};

&usbphy {
	usb1_vbus-supply = <&reg_usb1_vbus>;
	status = "okay";
};

003 File Manager

Editing: sun50i-a64-teres-i.dts

Upload File

Create Folder