File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/powerpc

usr / src / sys / contrib / device-tree / src / powerpc /

📁 ..
📄 a3m071.dts(2.4 KB)
📄 a4m072.dts(3.03 KB)
📄 ac14xx.dts(7.71 KB)
📄 acadia.dts(5.06 KB)
📄 adder875-redboot.dts(3.72 KB)
📄 adder875-uboot.dts(3.69 KB)
📄 akebono.dts(12.21 KB)
📄 amigaone.dts(3.87 KB)
📄 arches.dts(8.41 KB)
📄 asp834x-redboot.dts(6.52 KB)
📄 bamboo.dts(7.75 KB)
📄 bluestone.dts(9.66 KB)
📄 canyonlands.dts(15.39 KB)
📄 charon.dts(5.01 KB)
📄 cm5200.dts(1.31 KB)
📄 currituck.dts(7.28 KB)
📄 digsy_mtc.dts(2.84 KB)
📄 ebony.dts(8.22 KB)
📄 eiger.dts(10.5 KB)
📄 ep8248e.dts(4.36 KB)
📄 ep88xc.dts(4.4 KB)
📁 fsl
📄 fsp2.dts(12.79 KB)
📄 gamecube.dts(2.2 KB)
📄 glacier.dts(15.87 KB)
📄 haleakala.dts(7.41 KB)
📄 holly.dts(4.8 KB)
📄 hotfoot.dts(7 KB)
📄 icon.dts(12.33 KB)
📄 iss4xx-mpic.dts(3.75 KB)
📄 iss4xx.dts(2.79 KB)
📄 katmai.dts(14.24 KB)
📄 kilauea.dts(11.5 KB)
📄 klondike.dts(4.88 KB)
📄 kmeter1.dts(13.19 KB)
📄 ksi8560.dts(7.59 KB)
📄 kuroboxHD.dts(3.67 KB)
📄 kuroboxHG.dts(3.68 KB)
📄 lite5200.dts(6.53 KB)
📄 lite5200b.dts(3.11 KB)
📄 makalu.dts(9.8 KB)
📄 media5200.dts(3.15 KB)
📄 mgcoge.dts(5.76 KB)
📄 motionpro.dts(2.41 KB)
📄 mpc5121.dtsi(11.75 KB)
📄 mpc5121ads.dts(3.38 KB)
📄 mpc5125twr.dts(6.55 KB)
📄 mpc5200b.dtsi(7.14 KB)
📄 mpc7448hpc2.dts(4.19 KB)
📄 mpc8272ads.dts(6.2 KB)
📄 mpc8308_p1m.dts(6.94 KB)
📄 mpc8308rdb.dts(6.49 KB)
📄 mpc8313erdb.dts(9.09 KB)
📄 mpc8315erdb.dts(10.71 KB)
📄 mpc832x_mds.dts(10.5 KB)
📄 mpc832x_rdb.dts(8.51 KB)
📄 mpc8349emitx.dts(9.31 KB)
📄 mpc8349emitxgp.dts(5.49 KB)
📄 mpc834x_mds.dts(9.53 KB)
📄 mpc836x_mds.dts(11.38 KB)
📄 mpc836x_rdk.dts(10.35 KB)
📄 mpc8377_mds.dts(11.28 KB)
📄 mpc8377_rdb.dts(11.12 KB)
📄 mpc8377_wlan.dts(10.24 KB)
📄 mpc8378_mds.dts(10.91 KB)
📄 mpc8378_rdb.dts(10.75 KB)
📄 mpc8379_mds.dts(9.98 KB)
📄 mpc8379_rdb.dts(9.83 KB)
📄 mpc8610_hpcd.dts(11.01 KB)
📄 mpc866ads.dts(3.92 KB)
📄 mpc885ads.dts(5.09 KB)
📄 mucmc52.dts(4.58 KB)
📄 mvme5100.dts(4.35 KB)
📄 o2d.dts(783 B)
📄 o2d.dtsi(2.08 KB)
📄 o2d300.dts(932 B)
📄 o2dnt2.dts(796 B)
📄 o2i.dts(505 B)
📄 o2mnt.dts(517 B)
📄 o3dnt.dts(791 B)
📄 obs600.dts(7.85 KB)
📄 pcm030.dts(2.19 KB)
📄 pcm032.dts(3.64 KB)
📄 pdm360ng.dts(3.39 KB)
📄 pq2fads.dts(5.69 KB)
📄 ps3.dts(1.25 KB)
📄 rainier.dts(8.83 KB)
📄 redwood.dts(10.7 KB)
📄 sam440ep.dts(7.24 KB)
📄 sbc8548-altflash.dts(2.3 KB)
📄 sbc8548-post.dtsi(6.82 KB)
📄 sbc8548-pre.dtsi(903 B)
📄 sbc8548.dts(2.17 KB)
📄 sequoia.dts(10.42 KB)
📄 socrates.dts(7.3 KB)
📄 storcenter.dts(3.12 KB)
📄 stx_gp3_8560.dts(6.41 KB)
📄 stxssa8555.dts(8.66 KB)
📄 taishan.dts(10.58 KB)
📄 tqm5200.dts(4.47 KB)
📄 tqm8540.dts(7.23 KB)
📄 tqm8541.dts(6.9 KB)
📄 tqm8548-bigflash.dts(10.95 KB)
📄 tqm8548.dts(10.95 KB)
📄 tqm8555.dts(6.9 KB)
📄 tqm8560.dts(8.58 KB)
📄 tqm8xx.dts(4 KB)
📄 uc101.dts(2.55 KB)
📄 warp.dts(7.03 KB)
📄 wii.dts(5.56 KB)
📄 xcalibur1501.dts(15.41 KB)
📄 xpedite5200.dts(9.96 KB)
📄 xpedite5200_xmon.dts(10.97 KB)
📄 xpedite5301.dts(14.24 KB)
📄 xpedite5330.dts(15.53 KB)
📄 xpedite5370.dts(14.16 KB)
📄 yosemite.dts(8.22 KB)

Editing: taishan.dts

/*
 * Device Tree Source for IBM/AMCC Taishan
 *
 * Copyright 2007 IBM Corp.
 * Hugh Blemings <hugh@au.ibm.com> based off code by
 * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without
 * any warranty of any kind, whether express or implied.
 */

/dts-v1/;

/ {
	#address-cells = <2>;
	#size-cells = <1>;
	model = "amcc,taishan";
	compatible = "amcc,taishan";
	dcr-parent = <&{/cpus/cpu@0}>;

aliases {
		ethernet0 = &EMAC2;
		ethernet1 = &EMAC3;
		serial0 = &UART0;
		serial1 = &UART1;
	};

cpus {
		#address-cells = <1>;
		#size-cells = <0>;

cpu@0 {
			device_type = "cpu";
			model = "PowerPC,440GX";
			reg = <0x00000000>;
			clock-frequency = <800000000>; // 800MHz
			timebase-frequency = <0>; // Filled in by zImage
			i-cache-line-size = <50>;
			d-cache-line-size = <50>;
			i-cache-size = <32768>; /* 32 kB */
			d-cache-size = <32768>; /* 32 kB */
			dcr-controller;
			dcr-access-method = "native";
		};
	};

memory {
		device_type = "memory";
		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
	};

UICB0: interrupt-controller-base {
		compatible = "ibm,uic-440gx", "ibm,uic";
		interrupt-controller;
		cell-index = <3>;
		dcr-reg = <0x200 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
	};

UIC0: interrupt-controller0 {
		compatible = "ibm,uic-440gx", "ibm,uic";
		interrupt-controller;
		cell-index = <0>;
		dcr-reg = <0x0c0 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
		interrupt-parent = <&UICB0>;

};

UIC1: interrupt-controller1 {
		compatible = "ibm,uic-440gx", "ibm,uic";
		interrupt-controller;
		cell-index = <1>;
		dcr-reg = <0x0d0 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
		interrupt-parent = <&UICB0>;
	};

UIC2: interrupt-controller2 {
		compatible = "ibm,uic-440gx", "ibm,uic";
		interrupt-controller;
		cell-index = <2>; /* was 1 */
		dcr-reg = <0x210 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
		interrupt-parent = <&UICB0>;
	};

CPC0: cpc {
		compatible = "ibm,cpc-440gp";
		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
		// FIXME: anything else?
	};

L2C0: l2c {
		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
			   0x030 0x008>;		/* L2 cache DCR's */
		cache-line-size = <32>;		/* 32 bytes */
		cache-size = <262144>;		/* L2, 256K */
		interrupt-parent = <&UIC2>;
		interrupts = <0x17 0x1>;
	};

plb {
		compatible = "ibm,plb-440gx", "ibm,plb4";
		#address-cells = <2>;
		#size-cells = <1>;
		ranges;
		clock-frequency = <160000000>; // 160MHz

SDRAM0: memory-controller {
			compatible = "ibm,sdram-440gp";
			dcr-reg = <0x010 0x002>;
			// FIXME: anything else?
		};

SRAM0: sram {
			compatible = "ibm,sram-440gp";
			dcr-reg = <0x020 0x008 0x00a 0x001>;
		};

DMA0: dma {
			// FIXME: ???
			compatible = "ibm,dma-440gp";
			dcr-reg = <0x100 0x027>;
		};

MAL0: mcmal {
			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
			dcr-reg = <0x180 0x062>;
			num-tx-chans = <4>;
			num-rx-chans = <4>;
			interrupt-parent = <&MAL0>;
			interrupts = <0x0 0x1 0x2 0x3 0x4>;
			#interrupt-cells = <1>;
			#address-cells = <0>;
			#size-cells = <0>;
			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
					 /*SERR*/  0x2 &UIC1 0x0 0x4
					 /*TXDE*/  0x3 &UIC1 0x1 0x4
					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
			interrupt-map-mask = <0xffffffff>;
		};

POB0: opb {
			compatible = "ibm,opb-440gx", "ibm,opb";
			#address-cells = <1>;
			#size-cells = <1>;
			/* Wish there was a nicer way of specifying a full 32-bit
			   range */
			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
				  0x80000000 0x00000001 0x80000000 0x80000000>;
			dcr-reg = <0x090 0x00b>;
			interrupt-parent = <&UIC1>;
			interrupts = <0x7 0x4>;
			clock-frequency = <80000000>; // 80MHz

EBC0: ebc {
				compatible = "ibm,ebc-440gx", "ibm,ebc";
				dcr-reg = <0x012 0x002>;
				#address-cells = <2>;
				#size-cells = <1>;
				clock-frequency = <80000000>; // 80MHz

/* ranges property is supplied by zImage
				 * based on firmware's configuration of the
				 * EBC bridge */

interrupts = <0x5 0x4>;
				interrupt-parent = <&UIC1>;

nor_flash@0,0 {
					compatible = "cfi-flash";
					bank-width = <4>;
					device-width = <2>;
					reg = <0x0 0x0 0x4000000>;
					#address-cells = <1>;
					#size-cells = <1>;
					partition@0 {
						label = "kernel";
						reg = <0x0 0x180000>;
					};
					partition@180000 {
						label = "root";
						reg = <0x180000 0x200000>;
					};
					partition@380000 {
						label = "user";
						reg = <0x380000 0x3bc0000>;
					};
					partition@3f40000 {
						label = "env";
						reg = <0x3f40000 0x80000>;
					};
					partition@3fc0000 {
						label = "u-boot";
						reg = <0x3fc0000 0x40000>;
					};
				};
			};

UART0: serial@40000200 {
				device_type = "serial";
				compatible = "ns16550";
				reg = <0x40000200 0x00000008>;
				virtual-reg = <0xe0000200>;
 				clock-frequency = <11059200>;
				current-speed = <115200>; /* 115200 */
				interrupt-parent = <&UIC0>;
				interrupts = <0x0 0x4>;
			};

UART1: serial@40000300 {
				device_type = "serial";
				compatible = "ns16550";
				reg = <0x40000300 0x00000008>;
				virtual-reg = <0xe0000300>;
				clock-frequency = <11059200>;
				current-speed = <115200>; /* 115200 */
				interrupt-parent = <&UIC0>;
				interrupts = <0x1 0x4>;
			};

IIC0: i2c@40000400 {
				/* FIXME */
				compatible = "ibm,iic-440gp", "ibm,iic";
				reg = <0x40000400 0x00000014>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x2 0x4>;
			};
			IIC1: i2c@40000500 {
				/* FIXME */
				compatible = "ibm,iic-440gp", "ibm,iic";
				reg = <0x40000500 0x00000014>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x3 0x4>;
			};

GPIO0: gpio@40000700 {
				/* FIXME */
				compatible = "ibm,gpio-440gp";
				reg = <0x40000700 0x00000020>;
			};

ZMII0: emac-zmii@40000780 {
				compatible = "ibm,zmii-440gx", "ibm,zmii";
				reg = <0x40000780 0x0000000c>;
			};

RGMII0: emac-rgmii@40000790 {
				compatible = "ibm,rgmii";
				reg = <0x40000790 0x00000008>;
			};

TAH0: emac-tah@40000b50 {
				compatible = "ibm,tah-440gx", "ibm,tah";
				reg = <0x40000b50 0x00000030>;
			};

TAH1: emac-tah@40000d50 {
				compatible = "ibm,tah-440gx", "ibm,tah";
				reg = <0x40000d50 0x00000030>;
			};

EMAC0: ethernet@40000800 {
				unused = <0x1>;
				device_type = "network";
				compatible = "ibm,emac-440gx", "ibm,emac4";
				interrupt-parent = <&UIC1>;
				interrupts = <0x1c 0x4 0x1d 0x4>;
				reg = <0x40000800 0x00000074>;
				local-mac-address = [000000000000]; // Filled in by zImage
				mal-device = <&MAL0>;
				mal-tx-channel = <0>;
				mal-rx-channel = <0>;
				cell-index = <0>;
				max-frame-size = <1500>;
				rx-fifo-size = <4096>;
				tx-fifo-size = <2048>;
				phy-mode = "rmii";
				phy-map = <0x00000001>;
				zmii-device = <&ZMII0>;
				zmii-channel = <0>;
			};
		 	EMAC1: ethernet@40000900 {
				unused = <0x1>;
				device_type = "network";
				compatible = "ibm,emac-440gx", "ibm,emac4";
				interrupt-parent = <&UIC1>;
				interrupts = <0x1e 0x4 0x1f 0x4>;
				reg = <0x40000900 0x00000074>;
				local-mac-address = [000000000000]; // Filled in by zImage
				mal-device = <&MAL0>;
				mal-tx-channel = <1>;
				mal-rx-channel = <1>;
				cell-index = <1>;
				max-frame-size = <1500>;
				rx-fifo-size = <4096>;
				tx-fifo-size = <2048>;
				phy-mode = "rmii";
				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
				zmii-channel = <1>;
			};

EMAC2: ethernet@40000c00 {
				device_type = "network";
				compatible = "ibm,emac-440gx", "ibm,emac4";
				interrupt-parent = <&UIC2>;
				interrupts = <0x0 0x4 0x1 0x4>;
				reg = <0x40000c00 0x00000074>;
				local-mac-address = [000000000000]; // Filled in by zImage
				mal-device = <&MAL0>;
				mal-tx-channel = <2>;
				mal-rx-channel = <2>;
				cell-index = <2>;
				max-frame-size = <9000>;
				rx-fifo-size = <4096>;
				tx-fifo-size = <2048>;
				phy-mode = "rgmii";
				phy-address = <1>;
				rgmii-device = <&RGMII0>;
				rgmii-channel = <0>;
 				zmii-device = <&ZMII0>;
				zmii-channel = <2>;
				tah-device = <&TAH0>;
				tah-channel = <0>;
			};

EMAC3: ethernet@40000e00 {
				device_type = "network";
				compatible = "ibm,emac-440gx", "ibm,emac4";
				interrupt-parent = <&UIC2>;
				interrupts = <0x2 0x4 0x3 0x4>;
				reg = <0x40000e00 0x00000074>;
				local-mac-address = [000000000000]; // Filled in by zImage
				mal-device = <&MAL0>;
				mal-tx-channel = <3>;
				mal-rx-channel = <3>;
				cell-index = <3>;
				max-frame-size = <9000>;
				rx-fifo-size = <4096>;
				tx-fifo-size = <2048>;
				phy-mode = "rgmii";
				phy-address = <3>;
				rgmii-device = <&RGMII0>;
				rgmii-channel = <1>;
 				zmii-device = <&ZMII0>;
				zmii-channel = <3>;
				tah-device = <&TAH1>;
				tah-channel = <0>;
			};

GPT0: gpt@40000a00 {
				/* FIXME */
				reg = <0x40000a00 0x000000d4>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
			};

};

PCIX0: pci@20ec00000 {
			device_type = "pci";
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
			primary;
			large-inbound-windows;
			enable-msi-hole;
			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */

/* Outbound ranges, one memory and one IO,
			 * later cannot be changed
			 */
			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;

/* Inbound 2GB range starting at 0 */
			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;

interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
			interrupt-map = <
				/* IDSEL 1 */
				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8

/* IDSEL 2 */
				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
			>;
		};
	};

chosen {
		stdout-path = "/plb/opb/serial@40000300";
	};
};

003 File Manager

Editing: taishan.dts

Upload File

Create Folder