003 File Manager
Current Path:
/usr/src/sys/contrib/device-tree/Bindings/input/touchscreen
usr
/
src
/
sys
/
contrib
/
device-tree
/
Bindings
/
input
/
touchscreen
/
📁
..
📄
ad7879.txt
(2.27 KB)
📄
ads7846.txt
(3.6 KB)
📄
ar1021.txt
(350 B)
📄
auo_pixcir_ts.txt
(667 B)
📄
brcm,iproc-touchscreen.txt
(3.28 KB)
📄
bu21013.txt
(1.59 KB)
📄
bu21029.txt
(1.1 KB)
📄
chipone_icn8318.txt
(1.41 KB)
📄
colibri-vf50-ts.txt
(1.29 KB)
📄
cypress,cy8ctma140.yaml
(1.58 KB)
📄
cyttsp.txt
(3.12 KB)
📄
edt-ft5x06.yaml
(2.78 KB)
📄
eeti,exc3000.yaml
(1.29 KB)
📄
eeti.txt
(774 B)
📄
egalax-ts.txt
(428 B)
📄
ektf2127.txt
(736 B)
📄
elan,elants_i2c.yaml
(1.36 KB)
📄
exc3000.txt
(676 B)
📄
fsl-mx25-tcq.txt
(1.29 KB)
📄
goodix.yaml
(1.52 KB)
📄
hideep.txt
(1.17 KB)
📄
imx6ul_tsc.txt
(1.43 KB)
📄
iqs5xx.txt
(2.22 KB)
📄
lpc32xx-tsc.txt
(376 B)
📄
max11801-ts.txt
(373 B)
📄
melfas_mip4.txt
(517 B)
📄
mms114.txt
(977 B)
📄
pixcir_i2c_ts.txt
(857 B)
📄
raspberrypi,firmware-ts.txt
(680 B)
📄
resistive-adc-touch.txt
(1.15 KB)
📄
samsung,s6sy761.txt
(849 B)
📄
silead_gsl1680.txt
(1.52 KB)
📄
sis_i2c.txt
(980 B)
📄
sitronix-st1232.txt
(536 B)
📄
st,stmfts.txt
(1.11 KB)
📄
stmpe.txt
(2.55 KB)
📄
sx8654.txt
(542 B)
📄
ti-tsc-adc.txt
(3.45 KB)
📄
touchscreen.txt
(21 B)
📄
touchscreen.yaml
(2.66 KB)
📄
ts4800-ts.txt
(438 B)
📄
tsc2005.txt
(1.71 KB)
📄
tsc2007.txt
(1.25 KB)
📄
zet6223.txt
(817 B)
📄
zforce_ts.txt
(784 B)
Editing: tsc2005.txt
* Texas Instruments tsc2004 and tsc2005 touchscreen controllers Required properties: - compatible : "ti,tsc2004" or "ti,tsc2005" - reg : Device address - interrupts : IRQ specifier - spi-max-frequency : Maximum SPI clocking speed of the device (for tsc2005) Optional properties: - vio-supply : Regulator specifier - reset-gpios : GPIO specifier for the controller reset line - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates in ohm (defaults to 280) - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after the configured time (in milli seconds), the driver will reset it. This is disabled by default. - properties defined in touchscreen.txt Example: &i2c3 { tsc2004@48 { compatible = "ti,tsc2004"; reg = <0x48>; vio-supply = <&vio>; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; touchscreen-fuzz-x = <4>; touchscreen-fuzz-y = <7>; touchscreen-fuzz-pressure = <2>; touchscreen-size-x = <4096>; touchscreen-size-y = <4096>; touchscreen-max-pressure = <2048>; ti,x-plate-ohms = <280>; ti,esd-recovery-timeout-ms = <8000>; }; } &mcspi1 { tsc2005@0 { compatible = "ti,tsc2005"; spi-max-frequency = <6000000>; reg = <0>; vio-supply = <&vio>; reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */ touchscreen-fuzz-x = <4>; touchscreen-fuzz-y = <7>; touchscreen-fuzz-pressure = <2>; touchscreen-size-x = <4096>; touchscreen-size-y = <4096>; touchscreen-max-pressure = <2048>; ti,x-plate-ohms = <280>; ti,esd-recovery-timeout-ms = <8000>; }; }
Upload File
Create Folder