File Manager

003 File Manager

Current Path: /usr/src/sys/contrib/device-tree/src/arm64/renesas

usr / src / sys / contrib / device-tree / src / arm64 / renesas /

📁 ..
📄 aistarvision-mipi-adapter-2.1.dtsi(2.02 KB)
📄 beacon-renesom-baseboard.dtsi(13.39 KB)
📄 beacon-renesom-som.dtsi(5.68 KB)
📄 cat875.dtsi(1009 B)
📄 hihope-common.dtsi(5.78 KB)
📄 hihope-rev2.dtsi(1.56 KB)
📄 hihope-rev4.dtsi(2.81 KB)
📄 hihope-rzg2-ex-lvds.dtsi(846 B)
📄 hihope-rzg2-ex.dtsi(1.45 KB)
📄 r8a774a1-beacon-rzg2m-kit.dts(537 B)
📄 r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts(373 B)
📄 r8a774a1-hihope-rzg2m-ex.dts(494 B)
📄 r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts(374 B)
📄 r8a774a1-hihope-rzg2m-rev2-ex.dts(502 B)
📄 r8a774a1-hihope-rzg2m-rev2.dts(819 B)
📄 r8a774a1-hihope-rzg2m.dts(813 B)
📄 r8a774a1.dtsi(75.58 KB)
📄 r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts(378 B)
📄 r8a774b1-hihope-rzg2n-ex.dts(393 B)
📄 r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts(379 B)
📄 r8a774b1-hihope-rzg2n-rev2-ex.dts(401 B)
📄 r8a774b1-hihope-rzg2n-rev2.dts(849 B)
📄 r8a774b1-hihope-rzg2n.dts(843 B)
📄 r8a774b1.dtsi(71.83 KB)
📄 r8a774c0-cat874.dts(7.1 KB)
📄 r8a774c0-ek874-idk-2121wr.dts(1.95 KB)
📄 r8a774c0-ek874-mipi-2.1.dts(1.37 KB)
📄 r8a774c0-ek874.dts(375 B)
📄 r8a774c0.dtsi(55.95 KB)
📄 r8a774e1-hihope-rzg2h-ex.dts(365 B)
📄 r8a774e1-hihope-rzg2h.dts(574 B)
📄 r8a774e1.dtsi(45.44 KB)
📄 r8a77950-salvator-x.dts(2.55 KB)
📄 r8a77950-ulcb-kf.dts(398 B)
📄 r8a77950-ulcb.dts(792 B)
📄 r8a77950.dtsi(5.95 KB)
📄 r8a77951-salvator-x.dts(2.55 KB)
📄 r8a77951-salvator-xs.dts(3.66 KB)
📄 r8a77951-ulcb-kf.dts(398 B)
📄 r8a77951-ulcb.dts(1.06 KB)
📄 r8a77951.dtsi(89.79 KB)
📄 r8a77960-salvator-x.dts(1.48 KB)
📄 r8a77960-salvator-xs.dts(1.51 KB)
📄 r8a77960-ulcb-kf.dts(398 B)
📄 r8a77960-ulcb.dts(836 B)
📄 r8a77960.dtsi(80.41 KB)
📄 r8a77961-salvator-xs.dts(690 B)
📄 r8a77961-ulcb.dts(673 B)
📄 r8a77961.dtsi(44.21 KB)
📄 r8a77965-salvator-x.dts(1.36 KB)
📄 r8a77965-salvator-xs.dts(1.63 KB)
📄 r8a77965-ulcb-kf.dts(402 B)
📄 r8a77965-ulcb.dts(748 B)
📄 r8a77965.dtsi(72.39 KB)
📄 r8a77970-eagle.dts(4.32 KB)
📄 r8a77970-v3msk.dts(4.96 KB)
📄 r8a77970.dtsi(33.43 KB)
📄 r8a77980-condor.dts(5.87 KB)
📄 r8a77980-v3hsk.dts(4.7 KB)
📄 r8a77980.dtsi(43.38 KB)
📄 r8a77990-ebisu.dts(13.34 KB)
📄 r8a77990.dtsi(55.25 KB)
📄 r8a77995-draak.dts(8.59 KB)
📄 r8a77995.dtsi(32.24 KB)
📄 rzg2-advantech-idk-1110wr-panel.dtsi(734 B)
📄 salvator-common.dtsi(15.95 KB)
📄 salvator-x.dtsi(505 B)
📄 salvator-xs.dtsi(530 B)
📄 ulcb-kf.dtsi(6.77 KB)
📄 ulcb.dtsi(8.81 KB)

Editing: ulcb-kf.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Kingfisher (ULCB extension) board
 *
 * Copyright (C) 2017 Renesas Electronics Corp.
 * Copyright (C) 2017 Cogent Embedded, Inc.
 */

/*
 * SSI-PCM3168A
 *	aplay   -D plughw:0,2 xxx.wav
 *	arecord -D plughw:0,3 xxx.wav
 */

/ {
	aliases {
		serial1 = &hscif0;
		serial2 = &scif1;
	};

clksndsel: clksndsel {
		#clock-cells = <0>;
		compatible = "gpio-mux-clock";
		clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
		select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
	};

snd_3p3v: regulator-snd_3p3v {
		compatible = "regulator-fixed";
		regulator-name = "snd-3.3v";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

snd_vcc5v: regulator-snd_vcc5v {
		compatible = "regulator-fixed";
		regulator-name = "snd-vcc5v";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

wlan_en: regulator-wlan_en {
		compatible = "regulator-fixed";
		regulator-name = "wlan-en-regulator";

regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <70000>;
		enable-active-high;
	};
};

&can0 {
	pinctrl-0 = <&can0_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&can1 {
	pinctrl-0 = <&can1_pins>;
	pinctrl-names = "default";
	status = "okay";
};

&ehci0 {
	dr_mode = "otg";
	status = "okay";
};

&hscif0 {
	pinctrl-0 = <&hscif0_pins>;
	pinctrl-names = "default";
	uart-has-rtscts;

status = "okay";
};

&hsusb {
	dr_mode = "otg";
	status = "okay";
};

&i2c2 {
	i2cswitch2: i2c-switch@71 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x71>;
		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;

/* Audio_SDA, Audio_SCL */
		i2c@7 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <7>;

pcm3168a: audio-codec@44 {
				#sound-dai-cells = <0>;
				compatible = "ti,pcm3168a";
				reg = <0x44>;
				clocks = <&clksndsel>;
				clock-names = "scki";

VDD1-supply	= <&snd_3p3v>;
				VDD2-supply	= <&snd_3p3v>;
				VCCAD1-supply	= <&snd_vcc5v>;
				VCCAD2-supply	= <&snd_vcc5v>;
				VCCDA1-supply	= <&snd_vcc5v>;
				VCCDA2-supply	= <&snd_vcc5v>;

ports {
					#address-cells = <1>;
					#size-cells = <0>;
					mclk-fs = <512>;
					port@0 {
						reg = <0>;
						pcm3168a_endpoint_p: endpoint {
							remote-endpoint = <&rsnd_for_pcm3168a_play>;
							clocks = <&clksndsel>;
						};
					};
					port@1 {
						reg = <1>;
						pcm3168a_endpoint_c: endpoint {
							remote-endpoint = <&rsnd_for_pcm3168a_capture>;
							clocks = <&clksndsel>;
						};
					};
				};
			};
		};
	};

/* U11 */
	gpio_exp_74: gpio@74 {
		compatible = "ti,tca9539";
		reg = <0x74>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio6>;
		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;

audio_out_off {
			gpio-hog;
			gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
			output-high;
			line-name = "Audio_Out_OFF";
		};

hub_pwen {
			gpio-hog;
			gpios = <6 GPIO_ACTIVE_HIGH>;
			output-high;
			line-name = "HUB pwen";
		};

hub_rst {
			gpio-hog;
			gpios = <7 GPIO_ACTIVE_HIGH>;
			output-high;
			line-name = "HUB rst";
		};

otg_extlpn {
			gpio-hog;
			gpios = <9 GPIO_ACTIVE_HIGH>;
			output-high;
			line-name = "OTG EXTLPn";
		};

otg_offvbusn {
			gpio-hog;
			gpios = <8 GPIO_ACTIVE_HIGH>;
			output-low;
			line-name = "OTG OFFVBUSn";
		};

sd-wifi-mux {
			gpio-hog;
			gpios = <5 GPIO_ACTIVE_HIGH>;
			output-low;	/* Connect WL1837 */
			line-name = "SD WiFi mux";
		};

snd_rst {
			gpio-hog;
			gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
			output-high;
			line-name = "SND_RST";
		};
	};

/* U5 */
	gpio_exp_75: gpio@75 {
		compatible = "ti,tca9539";
		reg = <0x75>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio6>;
		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
	};
};

&i2c4 {
	i2cswitch4: i2c-switch@71 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x71>;
		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
	};

gpio_exp_76: gpio@76 {
		compatible = "ti,tca9539";
		reg = <0x76>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio7>;
		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
	};

gpio_exp_77: gpio@77 {
		compatible = "ti,tca9539";
		reg = <0x77>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio5>;
		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
	};
};

&ohci0 {
	dr_mode = "otg";
	status = "okay";
};

&pcie_bus_clk {
	clock-frequency = <100000000>;
};

&pciec0 {
	status = "okay";
};

&pciec1 {
	status = "okay";
};

&pfc {
	can0_pins: can0 {
		groups = "can0_data_a";
		function = "can0";
	};

can1_pins: can1 {
		groups = "can1_data";
		function = "can1";
	};

hscif0_pins: hscif0 {
		groups = "hscif0_data", "hscif0_ctrl";
		function = "hscif0";
	};

scif1_pins: scif1 {
		groups = "scif1_data_b", "scif1_ctrl";
		function = "scif1";
	};

sdhi3_pins: sdhi3 {
		groups = "sdhi3_data4", "sdhi3_ctrl";
		function = "sdhi3";
		power-source = <3300>;
	};

sound_pcm_pins: sound-pcm {
		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
		function = "ssi";
	};

usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};
};

&rcar_sound {
	pinctrl-0 = <&sound_pins
		     &sound_clk_pins
		     &sound_pcm_pins>;

ports {
		/* rsnd_port0/1 are on salvator-common */
		rsnd_port2: port@2 {
			reg = <2>;
			rsnd_for_pcm3168a_play: endpoint {
				remote-endpoint = <&pcm3168a_endpoint_p>;

dai-format = "i2s";
				bitclock-master = <&rsnd_for_pcm3168a_play>;
				frame-master = <&rsnd_for_pcm3168a_play>;
				dai-tdm-slot-num = <8>;

playback = <&ssi3>;
			};
		};
		rsnd_port3: port@3 {
			reg = <3>;
			rsnd_for_pcm3168a_capture: endpoint {
				remote-endpoint = <&pcm3168a_endpoint_c>;

dai-format = "i2s";
				bitclock-master = <&rsnd_for_pcm3168a_capture>;
				frame-master = <&rsnd_for_pcm3168a_capture>;
				dai-tdm-slot-num = <6>;

capture  = <&ssi4>;
			};
		};
	};
};

&scif1 {
	pinctrl-0 = <&scif1_pins>;
	pinctrl-names = "default";
	uart-has-rtscts;

status = "okay";
};

&sdhi3 {
	pinctrl-0 = <&sdhi3_pins>;
	pinctrl-names = "default";

vmmc-supply = <&wlan_en>;
	vqmmc-supply = <&wlan_en>;
	bus-width = <4>;
	no-1-8-v;
	non-removable;
	cap-power-off-card;
	keep-power-in-suspend;
	max-frequency = <26000000>;
	status = "okay";

#address-cells = <1>;
	#size-cells = <0>;
	wlcore: wlcore@2 {
		compatible = "ti,wl1837";
		reg = <2>;
		interrupt-parent = <&gpio1>;
		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
	};
};

&sound_card {
	dais = <&rsnd_port0	/* ak4613 */
		&rsnd_port1	/* HDMI0  */
		&rsnd_port2	/* pcm3168a playback */
		&rsnd_port3	/* pcm3168a capture  */
		>;
};

&ssi4 {
	shared-pin;
};

&usb2_phy0 {
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";

status = "okay";
};

&xhci0 {
	status = "okay";
};

003 File Manager

Editing: ulcb-kf.dtsi

Upload File

Create Folder